CraftBot 2 Bedienungsanleitung

Lies die bedienungsanleitung für CraftBot 2 (19 Seiten) kostenlos online; sie gehört zur Kategorie 3D-Drucker. Dieses Handbuch wurde von 33 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 7 Bewertungen. Hast du eine Frage zu CraftBot 2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

12

CraftBot

9. Please make sure that you have enough lament for the selected project. The quantity is pre

calculated by CraftWare.

10. After the object has been printed, remove it by gently pushing it aside with one hand while holding

onto the printing plate with the other one.

8. NAVIGATING THE BUILD PLATE AND THE EXTRUDER

Select the AXES on the menu.

The rst “back” button will, of course, return you to the main menu.

1. Extruder at „home” position

The small house icon indicates the „home” position of the extruder which is this location the front

left corner of the build plate. By pushing this icon, the extruder will move into „home position”.

2. Individual position settings

You can reset the extruder and the build plate to the “home” or “zero” position.

You can either set each axis one at a time (X, Y or Z), or do all three of them at once by touching the

appropriate button.

If the individual house icons are white, then this means that the motors of each highlighted icon are

engaged. To disengage the motors, click on the icon in the far right bottom corner (M with an X through

it), and you will see all of the house icons turn black. The motors have now been disengaged and you

can freely move the extruder by hand if you wish to do so.

The directional button to the right of the “home” button can be used to move along the X, Y or Z axis

using the motors. After clicking on this button you will be redirected to another display in which you will

see six dierent arrow buttons.

Note that this option can only be used if all of the motors are already activated and the house icons

are all white. If the house icons are black, then nothing will happen. In this case, after clicking on the

direction button, you will see all of the arrows in the color grey. To activate the motors, return to the

“home” icon and home in; the house icons will now turn white and you can go on to the direction display

and move the extruder and bed as you see t.

Produktspezifikationen