Cranborne Audio Carnaby 500 Bedienungsanleitung
Cranborne Audio
Nicht kategorisiert
Carnaby 500
Lies die bedienungsanleitung für Cranborne Audio Carnaby 500 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 3 Bewertungen. Hast du eine Frage zu Cranborne Audio Carnaby 500 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1
1
6
7
8
8
8
9
10
11
12
2
3
4
5
5. OUTPUT LEVEL CONTROL
[±20dB, 1dB steps]
Adjusts the output level of the module
post processing. Set in accordance to
the INPUT LEVEL CONTROL [1] to
maintain unity through the module.
1. INPUT LEVEL CONTROL
[±20dB, 1dB steps]
Adjusts the input level of the module and
internal saturation circuits. Set around 0dB
for nominal settings or push higher for more
harmonic saturation.
2. HI LEVEL CONTROL
[±10dB, 0.5dB steps]
Adjusts up to 10dB of boost/cut for the
high
shelf lter
at the frequency set using the HI
FREQUENCY CONTROL [7]. This control
progressively increases the amount of
harmonic saturation added to the signal
above the selected frequency in boost and
cut positions.
3. MID LEVEL CONTROL
[±10dB, 0.5dB steps]
Adjusts up to 10dB of boost/cut for the
mid
peaking lter
at the frequency set using the
MID FREQUENCY CONTROL[9]. This control
progressively increases the amount of
harmonic saturation added to the signal
within the selected frequency in boost and
cut positions.
4. LO LEVEL CONTROL
[±10dB, 0.5dB steps]
Adjusts up to 10dB of boost/cut for the
low
shelf lter
at the frequency set using the lo
FREQUENCY CONTROL [10]. This control
progressively increases the amount of
harmonic saturation added to the signal
above the selected frequency in boost and
cut positions.
10. LO FREQUENCY CONTROL
[20Hz - 420Hz]
Adjusts the corner frequency of the
low
frequency shelf lter
and sets the start
frequency where the harmonic saturation is
ltered into the dry signal.
9. MID FREQUENCY CONTROL
[200Hz - 6.2kHz]
Adjusts the mid-point frequency of the
mid
peaking lter
and sets the start frequency
where the harmonic saturation is ltered
into the dry signal.
7. HI FREQUENCY CONTROL
[5kHz - 25kHz]
Adjusts the corner frequency of the
high
frequency shelf lter
and sets the start
frequency where the harmonic saturation is
ltered into the dry signal.
12. IN SWITCH
[ OFF - ON]
Switches the module IN and OUT of the entire
circuit. LED will illuminate BLUE when the
unit is switched IN. LED will illuminate WHITE
when module is IN and slaved via OPTOSYNC.
11. OPTOSYNC SWITCH
[ OFF - ON]
Switches OPTOSYNC ON or OFF. When the
switch is ON, the module syncs its physical
controls to a second Carnaby 500 to its left.
When ON, the IN LED changes to WHITE and
pulses when controls are adjusted on the
master module. Multiple modules can be
synced for surround mastering or summing.
6. SIGNAL INDICATOR
[RGB LED]
Displays the
output
level of the module post
OUTPUT LEVEL CONTROL [5]. LED lights
GREEN from -12dBu and [CLIP] atRED
+24dBu.
8. BAND SATURATION INDICATOR
[RGB LED]
Indicates how hard the saturation stages are
being driven and how much harmonic
saturation is being added to the dry signal
for each Harmonic EQ
TM
band. LEDs start
illuminating at 3% THD measured at the~
output.
13
Produktspezifikationen
| Marke: | Cranborne Audio |
| Kategorie: | Nicht kategorisiert |
| Modell: | Carnaby 500 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Cranborne Audio Carnaby 500 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Cranborne Audio
16 Juni 2025
4 September 2024
26 August 2024
3 März 2024
Bedienungsanleitung Nicht kategorisiert
- Rockboard
- Huntleigh
- Living Style
- E-way
- CM Storm
- LVSUN
- P3 International
- Otamatone
- Sharkoon
- Gre
- Vinotemp
- Lamax
- Pure
- Foxconn
- IsoAcoustics
Neueste Bedienungsanleitung für -Kategorien-
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025