Crosley E200A Bedienungsanleitung

Lies die bedienungsanleitung für Crosley E200A (2 Seiten) kostenlos online; sie gehört zur Kategorie Plattenspieler. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 9 Bewertungen. Hast du eine Frage zu Crosley E200A oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

E SERIES RECORD PLAYER

EA INSTRUCTION MANUAL

INCLUDED ITEMS

Before installation, ensure all components listed below are included and

undamaged. Retain the original packaging for potential returns.

Note: The cartridge alignment and anti-skate control

components have been pre-adjusted to optimal settings

at the factory. No further adjustment is required.

Turntable Unit

Power Adapter

Dust Cover

Anti-Slip Mat

Platter

Sub-Platter

Drive Belt

Counterweight

Metal Phillips

Screwdriver（for

adjusting counterweigh

tightness)

User Manual

Cartridge

Alignment Card

Large-Hole Record

Adapter

Ceramic Flathead

Screwdriver (for speed

adjustment)

1

2

3

4

5

6

7

8

9

11

10

12

13

Motor Pulley

Drive Belt

Turntable Spindle

Sub-Platter

Platter

Mode Knob

Indicator Light

Anti-skate

Component

Counterweight

Balance Bar

Tonearm Lift Lever

Tonearm Lock

Cartridge

Volume & Power Knob

Ground Connector

Output Mode Switch

RCA Audio Output Ports

Speed Fine Adjustment

DC Input Jack

Dust Cover

COMPONENT DIAGRAM

Components Names

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

2. Installing the Platter

Follow the diagram to install the drive belt, platter, and anti-slip mat

in sequence.

Note: Ensure the belt is not twisted during installation. After attaching,

rotate the platter 10 times to verify smooth operation.

Drive Belt

Platter

Anti-Slip Mat

4. Playing a Record

Release the tonearm lock; Hold the stylus handle and move the stylus

to the outer edge of the record. Press the lift lever to the horizontal

position gently to allow the stylus to slowly land on the record, and the

record will start playing.

Important Tips

1.The correct speed setting (33 RPM or 45 RPM) is typically printed on the record

sleeve or inner label.

2.Clean the anti-slip mat regularly to prevent dust buildup, which may scratch records.

3.The platter will automatically stop rotating 3 minutes after playback ends.

4.Always lift the tonearm before resetting to avoid accidental stylus damage.

5.Ensure the tonearm is locked after use to prevent mechanical issues.

6.Store records vertically in their sleeves to avoid warping or scratches.

7.Disconnect the power adapter if the turntable will not be used for an extended period.

1

2

3

Anti-skate Component

Protective Pad

Stylus Protector

INSTALLATION

1.Before Installation

Remove the anti-skate component protective pads, stylus protector,

and other components.

Tip：Keep all removeded components for future shipment and use.

Important: When removing the stylus protector, ensure the stylus (needle)

is not accidentally detached. If the stylus is removed, refer to the

"Maintenance – Stylus Replacement" section for reinstallation instructions.

4. Placement

Place the turntable on a stable surface. Keep it away from speakers, radios

or devices that emit strong radio waves (such as smartphones) to avoid the

influence of vibration and sound pressure, as well as noise.

VINYL PLAYBACK

3. Installing the Counterweight

Install the counterweight, aligning it with the 2.0g tracking force mark

on the tonearm rear.

Caution: Do not confuse the counterweight

with the large-hole adapter.

Playing Records

1. Connect Power2. Place the Record

3.Control Operations

Rotate the knob to the –

position to power on. Adjust

the volume clockwise toward

+ as needed.

Rotate the knob to the

record's corresponding speed

setting (33 RPM/45 RPM),

and the platter will begin

rotating clockwise.

Connect Power

1

2

Power On

Power O

Turn clockwise to

increase volume

BT:Bluetooth

Mode

33 RPM

Indicator Light

White Light:

Vinyl Mode

Blue Light:

Bluetooth Mode

Blue Light

Flashing:

Bluetooth Pairing

Mode

45 RPM

Pause

5. Turntable Reset

Lift the Tonearm: Raise the lift lever first when resetting.

Return the Tonearm: Move the tonearm back to its locked position

and secure the lock.

Power O: Turn the knob to the OFF position.

Store the Record: Remove the record and place it back into its

protective sleeve.

Cover the Turntable: Close the dust cover securely.

2.0g

󾙡󾙟

󾙡󾙟

Produktspezifikationen