Crown P.I.P.-ISO Bedienungsanleitung
Crown
Nicht kategorisiert
P.I.P.-ISO
Lies die bedienungsanleitung für Crown P.I.P.-ISO (9 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 29 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 15 Bewertungen. Hast du eine Frage zu Crown P.I.P.-ISO oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/9

P.I.P.-ISO
125354-1
10/97
© 1997 by Crown International, Inc., P.O. Box 1000,
Elkhart, Indiana 46515-1000 U.S.A. Telephone: 219-294-
8000. Crown
P.I.P.
modules are produced by the
Professional Audio Division of Crown International, Inc.
Trademark Notice:
Com-Tech
®,
Crown
®,
Amcron
®,
Macro-Tech
® and
P.I.P.
® are registered trademarks of
Crown International, Inc. Other trademarks are the
property of their respective owners.
®
E106377
Applies only to North
American units.
ISO
Programmable
Input Processor (P.I.P.)
—WARNING—
THIS P.I.P. PROVIDES FULL ISOLATION
FOR ISO-MODIFIED AMPLIFIERS ONLY!
DO NOT CONNECT THE OUTPUT GROUND
LUG TO THE INPUT COMMON OR CHASSIS
GROUND. REFER TO P.I.P.–ISO OWNER’S
MANUAL FOR FURTHER INFORMATION.
+ –
CH-2 I NPU T
+ –
CH-1 I NPU T


P.I.P.-ISO
Page 3
1 Welcome
Thank you for purchasing the
Crown
P.I.P.-ISO
accessory.
P.I.P.
® modules are designed to
quickly install in the rear panel of
many Crown amplifiers.
P.I.P.
stands for “Programmable Input
Processor.” Their versatile fea-
tures expand the capabilities of
your amplifier and enable you to
customize it for your particular
needs.
The
P.I.P.-ISO
is intended for use
with ISO-MODIFIED
Com-Tech
®
series amplifiers. If it is used with
an amplifier that is not iso-modified
it will not have full isolation. In such
a case, only the input (not the out-
put) will be isolated from ground.
The
P.I.P.-ISO
comes with a “ISO-
MOD KIT” so a
Com-Tech
ampli-
fier can be iso-modified. (These
kits are also available separately.)
The amplifier modification
should be performed only by a
qualified technician. Once an
amplifier has been iso-modified, it
should not be used with any other
P.I.P.
modules except the
P.I.P.-
ISO
. (It is also possible to iso-
modify a
Macro-Tech
® series am-
plifier but the procedure is differ-
ent. Contact the Crown Technical
Support Group for more informa-
tion, if required, at 219/294-8200
or 800/342-6939.)
An iso-modified amplifier with a
P.I.P.-ISO
has completely isolated
outputs—the output voltage avail-
able between the positive and
ground terminal is not referenced
to earth ground. Even if either out-
put terminal is continuously
shorted to the earth ground (chas-
sis), no damage will occur to the
amplifier or any equipment inter-
connected to it.
The amplifier inputs are isolated
by means of input transformers.
The transformers are designed for
1 kVAC breakdown isolation and
have less than 25 pF of primary to
secondary capacitance yielding
excellent common mode rejection.
In addition to isolation, the
P.I.P.-
ISO
includes a switchable high-
pass filter to attenuate unwanted
Fig. 1.1 P.I.P.-ISO
ISO
Programmable
Input Processor (P.I.P.)
—WARNING—
THIS P.I.P. PROVIDES FULL ISOLATION
FOR ISO-MODIFIED AMPLIFIERS ONLY!
DO NOT CONNECT THE OUTPUT GROUND
LUG TO THE INPUT COMMON OR CHASSIS
GROUND. REFER TO P.I.P.–ISO OWNER’S
MANUAL FOR FURTHER INFORMATION.
+ –
CH-2 I N P U T
+ –
CH-1 I N P U T
Produktspezifikationen
Marke: | Crown |
Kategorie: | Nicht kategorisiert |
Modell: | P.I.P.-ISO |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Crown P.I.P.-ISO benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Crown
31 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
Bedienungsanleitung Nicht kategorisiert
- Amprobe
- BMW
- Carlo Gavazzi
- Vanson
- DoubleSight
- SXT
- Solidsteel
- Lasita Maja
- Royal Range
- RCA
- Alphatronics
- Stages
- Robus
- Tuur
- Neopower
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025