CRUX AUX-MB2 Bedienungsanleitung


Lies die bedienungsanleitung für CRUX AUX-MB2 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 10 Bewertungen. Hast du eine Frage zu CRUX AUX-MB2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
The AUX- 2 will enable the Auxiliary Audio Input on the Navigaon Radio menu.MB
Mercedes Benz
2014-2016
C class (W205)
Metris Van (W447)
AUX-MB2 OBDII Coder
Audio Input Cable
1. Locate OBD-port and remove cover (commonly located under the dashboard on the
driver side).
2. Turn ignion switch to ACC.
3. Wait unl the navigaon has booted.
4. Plug coder into OBD-port.
5. The navigaon will re-boot.
6. When the navigaon startup-screen shows, remove coder from OBD-port.
7. Your radio’s Auxiliary Audio input feature is now enabled.
To remove the Auxiliary Audio feature repeat steps 1- Aer the from the navigaon’s menu 6.
rst use on a vehicle, the coder AUX- 2 is personalized to this vehicle. On this vehicle the MB
enabling and removing the audio-AUX feature can be repeated without limit.
1 / 2
rev.030616


Produktspezifikationen

Marke: CRUX
Kategorie: Nicht kategorisiert
Modell: AUX-MB2

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX AUX-MB2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten