CRUX CLP-12 Bedienungsanleitung


Lies die bedienungsanleitung für CRUX CLP-12 (1 Seiten) kostenlos online; sie gehört zur Kategorie Sicherheitskamera. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu CRUX CLP-12 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.083019
CLP-12
Universal License Plate Camera
1
- Mounts behind the license plate for a clean look.
- Selectable Parking Guide Line ON or OFF.
PRODUCT FEATURES:
INSTALLATION DIAGRAM:
CLP-12 License Plate Camera 20 Extension Cable
WHITE Wire
Parking Guideline
Regulator
Extension Coax Cable
GROUND
RED Wire (A)*
License Plate Camera
RED Wire (B)*
Make sure the arrows
line up and push in
the connectors well.
To Aftermarket Radio
Backup Camera Input
OR
Reverse Camera Interface
Backup Camera Input
*NOTE: To power the camera, use RED Wire A or B. If tapping power from the radio or RVC Interface, make sure to
insulate RED Wire A to avoid it from shorng. If you will be tapping power from the reverse light +12V, insulate RED
Wire B to avoid it from shorng. With either connecon the Black GROUND wire needs to be connected to a solid chassis
ground. For vehicles with manual transmission, we recommend tapping +12V power from the reverse light.
R
INTERFACING SOLUTIONS
Sightline
CAMERAS
WHITE Wire Loop: Cut to remove parking guide lines. Connect to show parking guide lines. Insulate with tape to
avoid from shorng.
NOTE: Cycle the camera power by unplugging the 4 pin barrel connectors aer connecng or
disconnecng the control wires.


Produktspezifikationen

Marke: CRUX
Kategorie: Sicherheitskamera
Modell: CLP-12

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX CLP-12 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten