CRUX CS-LOC1 Bedienungsanleitung


Lies die bedienungsanleitung für CRUX CS-LOC1 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 13 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 7 Bewertungen. Hast du eine Frage zu CRUX CS-LOC1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
L REAR R
L FRONT R
INPUT OUTPUT
++++
Left Rear
Right Rear
Left Front
Right Front Right Front +
Right Front -
Left Front +
Left Front -
Right Rear +
Right Rear -
Left Rear +
Left Rear -
Black
CS-LOC1
4-CHANNEL LINE OUT CONVERTER
(Speaker Level to RCA)
1. Connect the front and rear speaker outputs of the radio to the
CS-LOC1 inputs.
2. The output RCAs can be cut to provide speaker wire outputs.
3. Set the headunit balance control to the center posion.
4. Set the level adjustment trim pots to minimum (full counter-clock
wise rotaon).
5. Set trim pot to desired level to avoid overdriving the amplier
input.
6. Black wire (input ground) = connect to ground if engine noise is
present.
Gray
Gray/Black
White
White/Black
Black
Purple
Purple/Black
Green
Green/Black
Right Front +
Right Front -
Le Front +
Le Front -
Input Ground
Right Rear +
Right Rear -
Le Rear +
Le Rear -


Produktspezifikationen

Marke: CRUX
Kategorie: Nicht kategorisiert
Modell: CS-LOC1

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX CS-LOC1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten