CRUX RVCPR-66K Bedienungsanleitung


Lies die bedienungsanleitung für CRUX RVCPR-66K (5 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 14 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 7.5 Bewertungen. Hast du eine Frage zu CRUX RVCPR-66K oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/5
- Acvates Reverse camera input in Porsche vehicles with PCM4 systems.
- Rear-view camera input.
- Front camera input.
- With OE type Dynamic Parking Guide Lines.
- -screen display setup. On
PORSCHE
Screen Size: 7
2017
718
2017
911
2017
Cayenne
2017
Macan
2017
Panamera
- Works on Porsche vehicles with PCM4 systems.
RVCPR-66K Module
Power Harness
OSD Board
LVDS Cable
1 5 /
rev.011317
RVCPR- K 66
2 / 5
rev.011317
RVCPR-66K
1. Review the connection of the LVDS cable below.
2. 66 Install the camera (not included) and route the cable to the location of the RVCPR- K module. Plug the Yellow RCA
connector of the camera cable to the female RCA of the RVCPR- K. Please take note of the Rear Cam RCA input. 66
3. at Remove the radio and make the wiring connectio ns the Quadlock connector. See diagrams below and next page.
3 / 5
rev.011317
RVCPR- K 66


Produktspezifikationen

Marke: CRUX
Kategorie: Nicht kategorisiert
Modell: RVCPR-66K

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX RVCPR-66K benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten