CRUX RVCTY-71A Bedienungsanleitung

Lies die bedienungsanleitung für CRUX RVCTY-71A (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 23 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 12 Bewertungen. Hast du eine Frage zu CRUX RVCTY-71A oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

RVCTY-71A

Rear View Integration with Lip Mount Camera for

Toyota Avalon (2013-2015) and Highlander (2014-2015)

R

INTERFACING SOLUTIONS

Sightline

Multi View Integration

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.053019

1 of 1

- Automacally switches to rear-view when vehicle is in reverse gear.

- Aermarket lip mount rear-view camera included.

- Plug & Play Installaon.

PRODUCT FEATURES:

4-PIN BARREL

CONNECTOR FOR CAMERA

POWER AND SIGNAL

4-PIN

(male plug)

Extension Cable

FACTORY

4-PIN

CONNECTOR

BLUE WIRE

(cut to ip image horizontally)

WHITE WIRE

(cut to remove guide lines)

INSTALLATION DIAGRAM:

Installing the Camera

1. Remove the trunk panel cover and locate the factory 4-pin camera pre-wire cable.

2. Find a spot to mount the camera and drill a 5/8” hole using the hole saw included.

3. Route the camera power and video connecons through 5/8” hole. Do not secure the camera yet unl aer

tesng the viewing angle.

4. Connect the 4-Pin plug of the RVCTY-71A camera harness to the factory 4-pin connector.

5. Disconnect the negave baery terminal for a few seconds

and reconnect to reset the factory system and recognize the

new camera.

6. Test the camera by pung the vehicle in reverse gear.

7. Check the camera viewing angle before securing it.

8. Re-install the trunk panel cover.

Factory 4-Pin connector

VEHICLE APPLICATIONS:

2013 - 2014 Avalon

2014 Highlander

2014 Avalon2014 Highlander

Produktspezifikationen