CRUX SOOGM-16B Bedienungsanleitung

Lies die bedienungsanleitung für CRUX SOOGM-16B (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 39 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 20 Bewertungen. Hast du eine Frage zu CRUX SOOGM-16B oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.2302021 of 3

RAD REPLATIOCEMEN

SWC ENTRETION

+

R

INTERFACING SOLUTIONS

- Retains factory features in select GM LAN 11 Bit vehicles while functioning with an aftermarket radio.

- Pre-programmed to retain factory Steering Wheel Controls.

- Supports Non-Bose and Bose amplified systems.

- Provides Vehicle Speed Sensor (VSS), Parking Brake and Reverse Outputs.

- Retains factory OnStar

®

- Retains chime functions.

-EIA color coded wiring for easy installation.

PRODUCT FEATURES:

PARTS INCLUDED:

INSTALLATION DIAGRAM:

SOOGM-16B MODULESOOGM-16B 14 & 16 PIN HARNESSSOOGM-16B 24 PIN HARNESSSWC CABLES

16 & 14-Pin Connector Harness

SOOGM-16B

Radio Replacement Interface with Steering Wheel Control Retention

for Select GM LAN 11-Bit Vehicles 2006-2012

AFTERMARKET

RADIO

Reverse GearPurple/White

Parking Brake Yellow/Black

Illumination (+) Orange

+12V Constant Yellow

+12V ACC Red

Ground Black

Right Front (+) Gray

Right Front (-) Gray/Black

Left Front (+) White

Left Front (-) White/Black

Right Rear (+) Violet

Right Rear (-) Violet/Black

Left Rear (+) Green

Left Rear (-) Green/Black

Vehicle Speed OutputRed/Black

Amplifier Turn-onBlue/White

24-Pin

Connector

8-Pin

Connector

BOSENON

BOSE

10-Pin

Connector

SWC DIP SWC

1 2 3 4

ON

Chime Volume

Adjustment

4-Pin

Connector

Cap or insulate if

not being used

3.5MM SWC CABLE

Plug in the 3.5MM SWC cable to the 4-pin port

on the module. See “DIP SWITCH SETTINGS” section.

JVC/Kenwood (Blue / Yellow)

To aftermarket

radio SWC wire or

3.5mm port

LAN Bus not recognized

LAN Bus recognized

24-Pin Connector Harness

Select

Appropriate

Harness

ANTENNA ADAPTER

TO FACTORY

HARNESS

Produktspezifikationen