CRUX SWRNS-63N Bedienungsanleitung

Lies die bedienungsanleitung für CRUX SWRNS-63N (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 8 Bewertungen. Hast du eine Frage zu CRUX SWRNS-63N oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.022025

SWRNS-63N

Radio Replacement with SteeringWheel Control Retention

for Select 2012-2019 NISSAN Vehicles w/ Navigation

1 of 6

RADIO REPLACEMENT

SWC RETENTION

+

R

INTERFACING SOLUTIONS

- Pre-programmed to retain factory Medium Speed CAN-Data Bus Steering Wheel Controls.

- Includes antenna adapter

- Retains Bose Amplifier system.

- Retains factory auxilary input

- Retains factory camera (not 360 panoramic camera)

- Retains factory USB input

- Provides Reverse Gear Output

PRODUCT FEATURES:

PARTS INCLUDED:

AntennaAdapter

SWRNS-63N MODULE

SWC CablesUSB Retention Cable

Optional Acc wire

24 PIN

20 PIN

INSTALLATION DIAGRAM FOR AMPLIFIED VEHICLES:

AFTERMARKET

RADIO

+12V Constant Yellow

+12V ACC Red

Ground Black

Illumination (+)Orange

Illumination (-)Orange/White

AmpTurn On

Blue/White

Right Front (+) Gray

Right Front (-) Gray/Black

Left Front (+) White

Left Front (-) White/Black

Right Rear (+) Violet

Right Rear (-) Violet/Black

Left Rear (+) Green

Left Rear (-) Green/Black

VSS (Vehicle Speed Signal)

Brown/White

Chassis Ground Black

Reverse Gear Output

Violet/White

(with RingTerminal)

TO FACTORY

HARNESS

12-Pin Black

Connector

BLUE/ Power Antenna

4-Pin

Connector

Yellow RCA

(Retain OE Camera)

RearView Camera Signal

Option A:

Option B:

Cap or insulate if

not being used

BLUE /YELLOW

Insulate with tape

if not being used

3.5MM SWC CABLES (Option A or B)

Use the proper 3.5MM to 4-Pin cable for your radio.

Plug in the selected 3.5MM SWC cable to the 4-pin port

on the module. See“DIP SWITCH SETTINGS” section.

To aftermarket

radio SWC wire

or 3.5mm port

1 2 3

ON

12v to 6v

Converter

Audio Input Red/White RCA

(Retains Factory AUX Input)

•For Amplied Systems Please Do Not Cut RCA to get better audio quality

USB-Min2

USB Retention Adaptor

(included in kit)

SWRNS-63N Harness

Produktspezifikationen