CTA Digital ADD-AUTCFVM Bedienungsanleitung

Lies die bedienungsanleitung für CTA Digital ADD-AUTCFVM (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 9 Bewertungen. Hast du eine Frage zu CTA Digital ADD-AUTCFVM oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

ADD-AUTCFVM

Aluminum Security Vehicle Mount with VESA Plate

Please be sure to fasten all the screws were tightened securely while using the stand.

Not for use while driving.

!

Caution

Package Contents:

5. Installing device to VESA mount

1. Insert key into lock at back of holder. Turn counterclockwise

to unlock, then slide to open. Insert tablet against fixed end,

then slide down to hold tight.Turn key clockwise to lock.

Instructions:

1. Taking a 75x75 or 100x100 VESA compatible device, line up the holes

and screw in the screws from the front while holding the hex nuts from the

back.

*Disclaimer - Ball Joint Warning

DO NOT attempt to adjust, tilt, or rotate any ball socket joints

while it is fully tightened. Any such action will result in possible

damage and loss of integrity of product functioning at full

capacity. CTA Digital will not be responsible for any such actions

by any person.

Hex. Allen KeyScrew M10x12L

180°90°45°

Vehicle Seat Rail Clamps

2. Align Vehicle Seat Rail Clamp and the

Allen Key

Screw

Vechicle Mount and Screw as shown in

diagram to the left. Use Allen Key to

screw together.

1. Installing Vehicle Seat Rail Clamp to the Vechicle Mount

Because each vehicle is different, you will need to determine which included seat rail clamp is best for you.

1. Choose the base with the

angle that matches your needs.

2.Installing Vechicle Mount to your Vechicle Seat Rail

1.Loose the bolt of the seat rail.

2.Install the assembled Vechicle Seat Rail

Clamp and Base set on the seat rail and

screw back the bolt.

3.Adjusting the Flex Arm

1. Twist the screw knob counter clockwise

to loosen the connection.

2. Adjust the arm to your preferred position and

then tighten the screw knob clockwise.

Produktspezifikationen