CTA Digital AUT-VHFM Bedienungsanleitung

Lies die bedienungsanleitung für CTA Digital AUT-VHFM (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 27 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 8 Bewertungen. Hast du eine Frage zu CTA Digital AUT-VHFM oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

for 7-14 Inch Tablets

AUT-VHFM

Vehicle Headrest Flex Mount

Please be sure to fasten all the screws were tightened securely while using the stand.

Not for use while driving.

Max loading :1KG

!

Caution

Package Contents:

Vehicle Headrest Flex Mount

Hex. Allen KeyM4x25 Screw x 4

2.Installing Vechicle Headrest Security Flex Mount to your Vechicle Headrest

x4

1. Screw both BASE of the calmp on the

headrest sopport with the M4*25 screw and Allen Key.

2. Repeat Step 1 to screw up 4 screws and

make sure you have installed it securely.

3.Adjusting the Flex Arm

1. Twist the SCREW KNOB(both or Either)

anticlockwise to release the connection.

2. Adjust the arm to your favorite position and then

tighten the SCREW KNOB clockwise .

4

Foam Pads

Instructions:

2.Tablet holder rotates 360 degrees for

custom viewing angles.

1.Press quick release button on side of tablet holder to release the

adjustable end. Insert tablet corner against the spring arm, then push

adjustable arm down against opposite corner. Be sure it is as snug

as possible.

360 rotation˚

4. Installing your Device and Adjusting the Tablet holder

Foam Pad

Thickness

Tablet

Thickness:

1mm 0.67-1.06in

5mm0.51-0.91in

10mm0.31-0.71in

17-27mm

13-23mm

8-18mm

Use this table to determine the appropriate

foam pad to use with your tablet.

Note: sizes refer to total tablet size with or without a case.

/

/

/

Select the appropriate foam pad according to the

thickness of your tablet (or tablet in its case), then

press adhesive side into center of the tablet holder.

1mm Foam Pad

5mm

Foam

Pad

10mm

Foam

Pad

1.Attaching Foam Pad to Tablet Holder

Produktspezifikationen