Ctek Smartpass 120 Bedienungsanleitung
Seiten 12 Engels Ladegerät
Lies die Bedienungsanleitung für Ctek Smartpass 120 kostenlos online oder lade das PDF herunter. 33 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
EN•3
EN
MANUAL
CONGRATULATIONS
on the purchase of your new CTEK charger providing professional battery care. This charger is
included in a series of professional chargers from CTEK SWEDEN AB and represents the latest
technology in battery charging. With the CTEK D250SA and SMARTPASS 120 you can be sure of
getting maximum performance from your dual battery system.
SAFETY
CALIFORNIA PROPOSITION 65
WARNING: This product contains chemical known to the state
of California to cause cancer or reproductive toxicity.
• The D250SA and SMARTPASS 120 have been developed for 12V lead-acid batteries. Do not use
the unit for any other type of battery.
• Wear protective goggles when connecting and disconnecting batteries.
• Battery acid is corrosive. Rinse with plenty of water immediately if you get acid on your skin or in
your eyes. Get medical assistance.
• Never use a charger with damaged electric cables. Check that the cables have not been dama-
ged by hot surfaces, sharp edges or in any other way.
• Explosive gases are generated while lead-acid batteries are being charged. Avoid any sparking
near the battery. Use in a well-ventilated location.
• Never place the charger above the battery, and avoid covering the charger during charging.
• Disconnect the battery terminal posts before installing.
• The D250SA and SMARTPASS 120 are not spark-free.
• The installation must include a fuse in accordance with the recommendations in the table
”CABLE AND FUSE RECOMMENDATIONS”.
WARNING!
The D250SA and
SMARTPASS 120 are not
protected against reversed
polarity.
Remember that all installations in boats must comply with ISO 10133!
1. The cabling from the batteries must have fuses near the batteries.
2. The batteries must be securely fastened in a ventilated space.
3. The cabling must be run through pipe ducting, separately from 230V/110V wiring (mains power),
or secured by clips at every 30 cm/1 ft.
4. Cabling in the engine compartment must be temperature rated at 70C/ 158F.
Temperature sensor 2 m/6 ft.
Smart alternator cable (red) 0.2 m/0.6 ft.
AGM Cable (black)
0.2 m/0.6 ft.
SMARTPASS 120
+OUT
+OUT
+IN
Negative cable connection (M8) 0.3 m/1 ft.
Connector plate
D250SA
SMARTPASS 120
Temperature sensor 2 m/6 ft.
+IN Input Alternator+OUT Output Service battery
+IN Input Alternator+OUT Output Service battery
+IN Input Solar panelEarth Connection
+OUT Output Consumers
Produktspezifikationen
| Marke: | Ctek |
| Kategorie: | Ladegerät |
| Modell: | Smartpass 120 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ctek Smartpass 120 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Ladegerät Ctek
Ctek Smartpass 120T Bedienungsanleitung Ctek D250T Bedienungsanleitung Ctek CT5 Powersport Bedienungsanleitung Ctek M25 Bedienungsanleitung Ctek M100 Bedienungsanleitung Ctek MXS 10 Bedienungsanleitung Ctek MXT 14 Bedienungsanleitung Ctek Smartpass 120S Bedienungsanleitung
Alle Ctek Ladegerät Bedienungsanleitungen
Beliebt in Ladegerät
Ctek MXS 5.0 Test and Charge Acculader Bedienungsanleitung Ctek CT5 START STOP Bedienungsanleitung Ctek PRO25SE Bedienungsanleitung
Bedienungsanleitung Ladegerät
Neueste Bedienungsanleitungen für Ladegerät
EcoFlow RIVER 3 Bedienungsanleitung EcoFlow DELTA 3 Max Plus Bedienungsanleitung Jackery Explorer 300D Bedienungsanleitung EcoFlow DELTA 3 Max Bedienungsanleitung Jackery Explorer 1500 Ultra Bedienungsanleitung Xtorm XTPP101 Bedienungsanleitung Xtorm XTPC0651 Bedienungsanleitung Votronic VBCS 30/20/250 Triple CI Bedienungsanleitung Votronic VBCS 60/40/430 Triple CI Bedienungsanleitung Votronic VBCS 45/30/350 Triple CI Bedienungsanleitung