D-Link DPP-201 Bedienungsanleitung

Lies die bedienungsanleitung für D-Link DPP-201 (1 Seiten) kostenlos online; sie gehört zur Kategorie power bank. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 4 Bewertungen. Hast du eine Frage zu D-Link DPP-201 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

v1.00(AU)_90x130 2025/04/09

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference

that may cause undesired operation.

20000mAh Power Bank

Quick Start Guide

DPP-201

USB-A

On/O󰀨 button

LED power indicator

USB Type-C

USB Type-C

12

Battery CapacityCapacity20,000mAh

InputUSB-C165W

USB-C265W

Output Single PortUSB-C165W

USB-C265W

USB-A22.5W

Output Dual PortsUSB-C1 + C235W + 20W

USB-C1 + A35W + 22.5W

USB-C2 + A15W

Output Triple PortsUSB-C1 + C2 +A35W + 15W

Multi-function

Button

Description

Click Button• Turn on LED

• The LED will turn o automatically if there is no load after 32

seconds

Double Click Button• Turn o the power bank

Press and hold

Button for 1 seconds

• Switch discharge mode between fast discharging and normal

discharging

LEDDescription

Digits 0 to 100

Discharge:

• Solid: The remaining battery capacity over 5%

• Blinking: The remaining battery capacity less than 5%

• The LED will turn o if there is no load after 32 seconds

Charge:

• The last digit number blinking: Charge the power bank

• Solid 100%: The power bank is fully charged

Green Lighting icon• The power bank in fast charging or fast discharging mode

E1~E7

• E1: USB-C1 over current protection

• E2: USB-C1 over voltage protection

• E3: USB-C1 under-voltage protection

• E4: USB-C2 or USB-A over current protection

• E5: USB-C2 or USB-A over voltage protection

• E6: USB-C2 or USB-A under-voltage protection

• E7: Overheat protection

Troubleshooting:

• E1~E6: Please click button or reconnect devices to x this issue

• E7: Please don’t use the battery and waituntil it cools down

ttps://support.dlink.com.au/

https://www.dlink.com.au/contactus

Produktspezifikationen