Daytronic 3340CF Bedienungsanleitung
Lies die bedienungsanleitung für Daytronic 3340CF (6 Seiten) kostenlos online; sie gehört zur Kategorie Messung. Dieses Handbuch wurde von 7 Personen als hilfreich bewertet und erhielt im Schnitt 3.5 Sterne aus 4 Bewertungen. Hast du eine Frage zu Daytronic 3340CF oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/6
1 GENERAL DESCRIPTION AND SPECIFICATIONS
The Model 10A10-4 is a precision conditioner designed for TC-based temperature
measurements requiring
high input isolation. With built-in reference-junction compen-
sation, it accepts up to four independent temperature signals from
Types B, E, J, K, R,
S, and T Thermocouples
. Any desired mixture of these thermocouple types is per-
mitted. Sensors may be grounded or ungrounded, in any desired mix. An amplifier-
per-channel design with chopper stabilization and active low-pass filtering allows
high-speed scan switching of high-level, stabilized signals, at exceptionally low cost
per channel.
All four 10A10-4 inputs are transformer-isolated, so that sensor-to-chassis and/or sen-
sor-to-sensor common-mode voltages as high as 1500 V-DC can be accommodated
at DC or low frequencies without damaging the instrument or perceptibly affecting
measurement accuracy (at 60 Hz, the common-mode voltage can be as high as 1000
V-AC (rms)).
During operation, appropriate reference-junction compensation, real-time digital lin-
earization, and engineering-unit scaling are automatically applied by the System 10
Central Processor for each type of thermocouple used. Detection of “open” thermo-
couples is also provided, as explained in Section 3.a.
The Model 10A10-4 includes a rear-panel connector block with screw terminals for
direct attachment of TC leads (which cannot be soldered). The same connector
accommodates all TC types. Since the connector assembly also contains a dual-
bead
precision thermistor for measurement of the reference-junction temperature,
no external cold junction is required—although the user may supply his own Con-
trolled Ambient Temperature Zone for reference-junction compensation, if desired.
The reference-junction-corrected temperature is made available to the Central
Processor through the
Model 10A11 Thermocouple Output Processor Card. The
purpose of the 10A11 is to proportion and sum the cold-junction reference signal and
the amplified TC signal of each channel for presentation to the system's Analog Signal
Bus.
One 10A11 must therefore be installed in every System 10 A-card rack contain-
ing one or more Model 10A10-4's.
You can use an optional Model 10CTJB-8 Thermocouple Junction Box with a
Model 10A10-4 to move the temperature-compensated reference junction to the actu-
al site of up to eight
remote thermocouple sensors. As explained in Section 4, below,
TC leads connect directly to the 10CTJB-8's internal screw terminals, in any desired
type mixture. The Junction Box then sends their signals to the 10A10-4 Conditioner
via copper conductors (only).*
SYSTEM 10
ANALOG INPUT CARDS
MODEL 10A10-4
QUAD ISOLATED THERMOCOUPLE
CONDITIONER CARD
1.E.2.10A10-4
GENERAL DESCRIPTION AND SPECIFICATIONS 10A10-4.1
* The 10CTJB-8 can only be used in environments with an ambient temperature between 0° F
and +140° F.
Produktspezifikationen
| Marke: | Daytronic |
| Kategorie: | Messung |
| Modell: | 3340CF |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Daytronic 3340CF benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Messung Daytronic
8 September 2025
8 September 2025
8 September 2025
8 September 2025
7 September 2025
7 September 2025
7 September 2025
7 September 2025
7 September 2025
7 September 2025
Bedienungsanleitung Messung
- Kyoritsu
- PICO
- Klein Tools
- Greenlee
- X4-Life
- MSW
- Eastron
- Lascar Electronics
- Berger & Schröter
- Eltako
- Enovalab
- Parkside
- Triplett
- Fixpoint
- Hama
Neueste Bedienungsanleitung für -Kategorien-
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
19 Januar 2026
19 Januar 2026
19 Januar 2026
19 Januar 2026
18 Januar 2026