Daytronic 5M30 Bedienungsanleitung
Lies die bedienungsanleitung für Daytronic 5M30 (12 Seiten) kostenlos online; sie gehört zur Kategorie Detektor. Dieses Handbuch wurde von 12 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 6.5 Bewertungen. Hast du eine Frage zu Daytronic 5M30 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/12
The Model 5M30 is a single-channel conditioner of phase-sensitive carrier-amplifier
design. Intended for applications involving linear variable differential transformer (LVDT)
sensors or with the addition of two completion resistors, variable reluctance transducers
can be accommodated. The 5M30 will condition and provide a calibrated analog ouptut signal
for the measurement of force, load, pressure, displacement and other parameters associated
with AC based LVDT sensors. The 5M30 can be used with short or long stroke LVDTs
with user selectable gain, zero, automatic or manual phase control and selectable analog
output of voltage or current.
1 GENERAL DESCRIPTION AND SPECIFICATIONS
Model 5M30 AC LVDT Module
Access switch settings via the front
panel of the 5M30 by gently pulling the
clear plastic cover (from the bottom
side) so the cover rotates open from
5M30
DIN AC LVDT Conditioner
MODEL 5M30
AC LVDT
C
ONDITIONER Module
1.A.1.5M30
GENERAL DESCRIPTION AND SPECIFICATIONS 5M30.1
or without power to the unit. Once
completed, return the cover to the
View of Side Label of the Model 5M30 AC LVDT Module
the top. Use a small tool or finger to
place the switches to the left or right
position as you face the front of the
module. This process can be done with
original position.
AC LVDT Phase Operation
Due to the AC modulated aspects of the
5M30 AC Voltage excitation circuit, the 5M30
contains a Manual or Automatic selection
for transducer Phase adjustment which
to the conditioner's demodulator. When
the demodulator is aligned properly through
calibration, maximum amplitude and
accuracy are achieved.
The Model 5M30 is calibrated by the “two-point (dead-weight)” process involving known
displacement standards, which is outlined in section three.
92339.00
aligns the transducer's return output signal
Produktspezifikationen
| Marke: | Daytronic |
| Kategorie: | Detektor |
| Modell: | 5M30 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Daytronic 5M30 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Detektor Daytronic
7 September 2025
Bedienungsanleitung Detektor
- Axis
- Busch-Jaeger
- Aqara
- NEO Tools
- Vevor
- V-TAC
- Techly
- Hager
- IGet
- Ring
- Sauermann
- Sonel
- Kemo
- Olympia
- PATLITE
Neueste Bedienungsanleitung für -Kategorien-
13 Januar 2026
5 Januar 2026
4 Januar 2026
1 Januar 2026
10 Dezember 2025
8 Dezember 2025
27 November 2025
24 November 2025
23 November 2025
23 November 2025