Daytronic IL40A Bedienungsanleitung


Lies die bedienungsanleitung für Daytronic IL40A (12 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 13.5 Bewertungen. Hast du eine Frage zu Daytronic IL40A oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/12
The Model IL40A is a single-channel conditioner which accepts any AC or unipolar pulse input,
irrespective of waveform, from turbine flow meters, magnetic pick ups or similar frequency-generating
transducers. The frequency source can be grounded or floating. For environments which may have high
frequency noise or a DC offset on the input signal, the IL40A contains input suppression and DC offset
capacitive coupled signal termin
als. When used with an open-collector type sensor, the IL40A requires
a pull-up resistor (typically 10k Ohms) between + Signal and + Excitation.
1 GENERAL DESCRIPTION AND SPECIFICATIONS
IL40A
IN-LINE Frequency Conditioner
MODEL IL40A
Frequency
C
ONDITIONER Module
GENERAL DESCRIPTION AND SPECIFICATIONS 5M40.1
View of the Model IL40A Frequency Module (cover removed)
Sensitivity Operation: The IL40A contains four selectable input sensitivity ranges which allows the
user to accommodate input signal levels to the IL40A's "Smart Schmitt" trigger circuit for signals as
low as 50 millivolts ( i.e. low flow turbine meters) and up to inputs as high
as 250 Volts as seen in
magnetic speed sensors.
The Model IL40A is calibrated by means of a “two-point (dead-weight)” process involving a known
frequency standard or through the use of the "F CAL" reference provided.
92372.00 rev. B


Produktspezifikationen

Marke: Daytronic
Kategorie: Nicht kategorisiert
Modell: IL40A

Brauchst du Hilfe?

Wenn Sie Hilfe mit Daytronic IL40A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten