Denon DJ Axis 8 Bedienungsanleitung
Denon DJ
Lautsprecher
Axis 8
Lies die bedienungsanleitung für Denon DJ Axis 8 (24 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 47 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 24 Bewertungen. Hast du eine Frage zu Denon DJ Axis 8 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/24
User Guide English ( 2 – 5 )
Guía del usuario Español ( 6 – 9 )
Guide d’utilisation Français ( 10 – 13 )
Guida per l’uso Italiano ( 14 – 17 )
Benutzerhandbuch Deutsch ( 18 – 21 )
Appendix English ( 22 – 23 )
2
User Guide (English)
Introduction
Box Contents
Axis Loudspeaker User Guide
Power Cable Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit denondj.com.
Setup / Connection Diagrams
You can set up your Axis loudspeaker in one of two ways:
Important: Please also see the following Important Safety Instructions chapter.
• Flat: Set the loudspeaker directly on a flat, stable surface (the floor or a low, sturdy table).
You can stack multiple Axis loudspeakers in a column, but make sure that all of them are
of the same model (Axis 8 or Axis 12) and that each loudspeaker’s feet are placed firmly
in the 4 sockets of the unit beneath it.
• Pole-Mounted: Carefully lift the loudspeaker and place the 36 mm hole in its bottom
panel over a standard 35 mm pole or speaker stand.
See the following examples of how to integrate the loudspeaker into your setup.
Note: Items not listed in Introduction > Box Contents are sold separately.
Example 1: 1 loudspeaker with vocal microphone and media player
Connect a dynamic microphone to Input 1 using an XLR or 1/4” (6.35 mm) TRS cable. Make
sure the Line/Mic Selector is set to Mic. Connect a media player (smartphone, tablet, MP3
player, etc.) to Input 2’s RCA connectors using a 1/8”-to-RCA (3.5mm-to-RCA) cable.
Note: Use only dynamic microphones with the loudspeaker unless you are also using an
external phantom power supply.
Dynamic
microphone
Smartphone,
tablet,
MP3 player,
etc. Power
3
Example 2: 2 loudspeakers with mixer
Connect the left and right output of your mixer to Input 1 of each loudspeaker using XLR or
1/4” (6.35 mm) TRS cables. Make sure the Line/Mic Selectors are set to Line.
Tip: To send the same mix to both loudspeakers, connect both channels of your mixer to the
Inputs 1 and 2 of one loudspeaker, set its Input 1/Mix Selector to Mix, and then connect that
loudspeaker’s Thru Output to Input 1 of the other loudspeaker. Both loudspeakers will then
play identical summed mono mixes.
Tip: To add extension loudspeakers in a “daisy chain” configuration, connect the Thru Output
to the input of your additional loudspeaker. Be sure to set the Input 1/Mix Selector to the
desired setting.
Example 3: 1 subwoofer and 2 loudspeakers with mixer
Using XLR or 1/4” (6.35 mm) TRS cables, connect the left and right output of your mixer to the
inputs of your subwoofer, and then connect each high-pass output of the subwoofer to
Input 1 of each loudspeaker. Make sure the Line/Mic Selectors are set to Line.
Power Power
Mixer
Power
Mixer
Subwoofer
Power
Produktspezifikationen
| Marke: | Denon DJ |
| Kategorie: | Lautsprecher |
| Modell: | Axis 8 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Denon DJ Axis 8 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lautsprecher Denon DJ
17 Januar 2024
2 Januar 2024
Bedienungsanleitung Lautsprecher
- Trust
- Sylvania
- Nedis
- DAS Audio
- SSV Works
- Maginon
- Majority
- Vox
- Devialet
- EarFun
- XLEADER
- Pursonic
- Media-tech
- Trettitre
- Acoustic Energy
Neueste Bedienungsanleitung für -Kategorien-
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025