Digi Connect WAN Bedienungsanleitung

Digi Router Connect WAN

Lies die bedienungsanleitung für Digi Connect WAN (5 Seiten) kostenlos online; sie gehört zur Kategorie Router. Dieses Handbuch wurde von 24 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 12.5 Bewertungen. Hast du eine Frage zu Digi Connect WAN oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/5

Quick Start Guide

Digi Connect

™WAN

1Verify kit contents

2Insert SIM card

Digi, Digi International, Digi Connect and the Digi logo are trademarks or registered trademarks of Digi International, Inc., in the United States and other countries worldwide. All other trademarks are property of their respective owners.

4Congure your cellular settings

Digi Connect WAN

Ethernet

cross-over cable

Antenna - may be sold

separately

NOTE:

Orient SIM card with metal side up and short corner to the inside. Use caution to insure

card is properly seated in SIM slot.

Not included: A SIM card must be supplied and activated by a Cellular Service

Provider for device operation.

5Verify

aOpen your web browser and enter the IP address 192.168.1.1in the URL address bar.

From the web interface, under Conguration, click “Mobile.” Enter your service provider name and connection parameters and click “Apply.”

The Digi Connect WAN has DHCP server enabled by default. In order to discover your Digi device, make sure your host computer is set up to obtain IP

addresses automatically. Also ensure all rewall software is temporarily disabled.

Your device has been properly provisioned and is active if the PPP section shows (connected).

Remove the Ethernet cable and plug it back into the PC to update the DNS.

Open a web browser and enter a web site of your choice in the URL address bar of your browser and hit “enter” (e.g. www.digi.com).

™

For additional information about your cellular connection, go to Administration > System Information > Mobile.

Power supply

Connect Antenna

NOTE: Do not over-tighten antenna.

Over-tightening may damage internal

connections. Loosen antenna before

adjusting antenna angles.

bConnect Ethernet cross-over cable

to a PC

cConnect Power Supply

(WAN IA

Models)

DB9

RS232

DCD

RxD

TxD

DTR

GND

DSR

RTS

CTS

RS422/485

Full Duplex

CTS-

RxD+

TxD+

DTR

GND

RxD-

RTS+

CTS+

TxD-

RS485

Half Duplex

not used

RxD+

TxD+

not used

GND

RxD-

not used

TxD-

DB9 Serial Pinout

NOTE: Set serial mode in software then on the

web interface go to Conguration/Serial Ports

Connect hardware

™

eFor more information on the Digi Connect WAN reference the User’s Guide provided on the Digi support site (www.digi.com/support).

™

90000670_H

Produktspezifikationen

Marke:	Digi
Kategorie:	Router
Modell:	Connect WAN
GPS:	Nein
Breite:	85 mm
Tiefe:	133.3 mm
Gewicht:	200 g
Produktfarbe:	Schwarz
Höhe:	25 mm
Energiequelle:	AC, DC
Betriebstemperatur:	-30 - 75 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Unterstützte Sicherheitsalgorithmen:	256-bit AES, 3DES, DES, SSH, SSL/TLS
Zertifizierung:	PTCRB, NAPRD.03, GCF-CC, R&TTE, EN 301 511\r\nCDG, TIA/EIA-690, TIA/EIA-98-E\r\nCE, FCC Part 15 (Class A), AS/NZS CISPR 22, EN55024, EN55022, Class A
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Gerätetyp:	Ausrüstung für drahtloses Handy-Netzwerk
Ethernet LAN Datentransferraten:	10, 100 Mbit/s
LED-Anzeigen:	Ja
Web-basiertes Management:	Ja
Ausgangsspannung:	6 - 30 V
Integrierter Kartenleser:	Nein
Serielle Schnittstelle:	RS-232
Funkfrequenz:	2300 - 2700 MHz
VPN Unterstützung:	IPsec w/ IKE/ISAKMP
DHCP-Client:	Ja
DHCP-Server:	Ja
Datennetzwerk:	4G, WiMAX
NEtzwerkadressenübersetzung (NAT):	Ja
Datenübertragungsrate:	0.1 Gbit/s
Antenne Steckertyp:	SMA
Anzahl USB 1.1 Anschlüsse:	1
Ethernet/LAN:	Ja
Anzahl der DE-9-Verbindungen:	1