Digital Watchdog DWC-P336PARAMW Bedienungsanleitung
Digital Watchdog
Nicht kategorisiert
DWC-P336PARAMW
Lies die bedienungsanleitung für Digital Watchdog DWC-P336PARAMW (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 2 Bewertungen. Hast du eine Frage zu Digital Watchdog DWC-P336PARAMW oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2

DWC-P336PARAMW
Parapet mount bracket for white IP PTZ cameras
Quick Start Guide
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results
for applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
WHAT’S IN THE BOX
1x Teflon tape
12x hex screws (M10x30)
3x nuts (M6) 12x nuts (M10)
3x wrench screws (M6x30) 12x spring washers (M10)
1x hex Allen wrench (2.5) 12x flat washers (M10)
1x hex Allen wrench (5) 1x quick setup guide

Quick Start Guide
Rev Date: 01/20
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
INSTALLING THE MOUNTING ACCESSORY
Roof mount installationParapet mount installation
Before the installation
1. The hardware necessary to install the mount depends on your installation
requirements.
2. The mount has pre-drilled holes for use with 3/8-16 (M10) type hardware
(recommended). Use as many of the mounting holes as possible.
3. Multiple fastening positions facilitate mounting flexibility. For a roof or
parapet installation, mount the camera using a minimum of five fasteners
on each side of the mounting plate.
4. Adding a sealant around the bolt holes between the mount and mounting
surface can prevent damage from water leakage
5. Be sure that the mount is installed in a location that can support the load.
All mounting hardware must have a minimum pullout strength of 600 lb
(272 kg) per bolt.
6. When mounting to wood, use screws long enough to penetrate at least
2.5” (64 mm).
7. When mounting to a steel structure, drill holes according to the
mounting pattern.
8. When mounting to masonry or concrete, use lead anchors or expansion
bolts installed according to the manufacturer’s instruction.
9. Run all necessary cabling to the location selected for the installation. Pass
the cables through the mount’s pole and connect to the camera as needed.
Mount hole size: inch (mm)
Produktspezifikationen
Marke: | Digital Watchdog |
Kategorie: | Nicht kategorisiert |
Modell: | DWC-P336PARAMW |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Digital Watchdog DWC-P336PARAMW benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Digital Watchdog
9 September 2025
21 Juni 2025
30 August 2024
30 August 2024
30 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
Bedienungsanleitung Nicht kategorisiert
- Maxxter
- Snow Joe
- Keter
- PNI
- Eissound
- Lampa
- Nordea
- BabyGO
- Pfannenberg
- XGIMI
- Tascam
- Velux
- ADATA
- Nikkei
- Oricom
Neueste Bedienungsanleitung für -Kategorien-
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025