Dito Sama 603432 Bedienungsanleitung

Lies die bedienungsanleitung für Dito Sama 603432 (6 Seiten) kostenlos online; sie gehört zur Kategorie Schneidemaschine. Dieses Handbuch wurde von 8 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 8 Bewertungen. Hast du eine Frage zu Dito Sama 603432 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

This document is to be used in conjunction with the original manufacturer’s manual.

The symbols correspond with the numbered drawings of the original manual

Contents

GB

05/2024

Fault nding 4

Maintenance 5

Conformity with regulations 6

Introduction 1

Installation 1

Use, safety 2

Cleaning, hygiene and storage 4

1.1

Introduction

1.1 DESCRIPTION

• The automatic French fries cutter is a machine for profesisonal

use that allows obtaining fresh fries of excellent quality and to cut

potatoes in slices.

ACutter block

BMobile stainless steel stand (option)

CPolished aluminium body

DStainless steel feed hopper

EHopper locking lever

FSTART button

GSTOP button

HOutlet chute

• Thanks to its high output and adapted cutting equipment, the

machine satises the requirements of restaurants, catering

kitchens and food industries.

Installation

2.1

2.1 DIMENSIONS - WEIGHT (For information only)

• Dimensions of packaging:

- machine L x W x H (mm): 755 x 410 x 680

- stand L x W x H (mm): 750 x 500 x 200

• Dimensions of the machine:

- without stand: L x W x H (mm): 670 x 360 x 556

2.2

- with stand: L x W x H (mm): 736 x 458 x 1264

• Weight :

- gross when packaged: 45 kg

- net equipped (with rotor and without cutting equipment): 37 kg

- net of stand: 15 kg

2.2 LOCATION AND LAYOUT

• The machine (whether packed or not) is meant to be lifted

using a forklift truck. If manual handling is going to be used for

the machine on its own, two people are needed (for all machines

weighing more than 25 Kg)

• On a table of between 600 and 750 mm maximum in height.

• On a stand (available as an option) which can hold large capacity

collection tubs.

• To block and level the stand:

- Unscrew the lock screw on the two adjustable feet (10 mm

socket spanner).

- Adjust the foot then lock in position.

- Check that the machine is stable.

• If necessary, anchor the stand in position:

- Counter drill the attachment holes of the feet (5 mm dia.

screws x 40 mm long and rawl plugs not supplied).

Introduction

The User Manual contains useful information for the user on how

to work correctly and in complete safety, and is designed to make

it easier to use the machine (called «machine» or «appliance»

below).

What follows is in no case intended to be a long list of warnings and

constraints, but rather a series of instructions meant to improve the

service provided by the machine in every respect, and particularly

to avoid a series of injuries or damage to equipment that might

result from inappropriate procedures for use and management.

It is essential that all the people responsible for transporting,

installing, commissioning, using, maintaining, repairing or dis-

mantling the machine should consult this manual and read it

carefully before proceeding with the various operations, in order

to avoid any incorrect or inappropriate handling that might be

result in damage to the machine or put people’s safety at risk.

It is just as important that the Manual should always be available

to the operator and it should be kept carefully where the machine

is used ready for easy and immediate consultation in case of any

doubt, or in any case, whenever the need arises.

If after reading the Manual, there are still any doubts concerning

how to use the machine, please do not hesitate to contact the

Manufacturer or approved After Sales Service provider, who is

constantly available to ensure quick and careful service for im-

proved machine operation and optimum e󰀩ciency.

Note that the safety, hygiene and environmental protection stan-

dards currently applicable in the country where the machine is

installed must always be applied during all phases of machine

operation. Consequently it is the user’s responsibility to ensure

that the machine is operated and used solely under the optimum

safety conditions laid down for people, animals and property.

1 RC14 GB 02 2016

The reference language for these instructions is French.

Produktspezifikationen