Vollrath 40950 Bedienungsanleitung
Vollrath
Schneidemaschine
40950
Lies die bedienungsanleitung für Vollrath 40950 (8 Seiten) kostenlos online; sie gehört zur Kategorie Schneidemaschine. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu Vollrath 40950 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/8
Operator’s Manual
Medium-Duty Electric Slicers
©
2016 The Vollrath Company L.L.C. Part No. 350008-1 en 4/28/16
Please register your product at Vollrath.com
Thank you for purchasing this Vollrath equipment. Before operating the
equipment, read and familiarize yourself with the following operating
and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. Save the original box and packaging. Use this packaging
to ship the equipment if repairs are needed.
SAFETY PRECAUTIONS
To ensure safe operation, read the following statements and understand
their meaning. This manual contains safety precautions which are
explained below. Please read carefully.
Warning is used to indicate the presence of a hazard that will or can
cause severe personal injury or death.
Caution is used to indicate the presence of a hazard that will or can
cause minor or major personal injury if the caution is ignored.
NOTICE: Notice is used to note information that is important but not
hazard-related.
To reduce risk of injury or damage to the equipment:
• Keep out of reach of children.
• Do not turn equipment on unless all guards are in place.
• Do not feed food by hand; always use the food pusher.
• Equipment must be connected to a properly grounded electrical
supply matching the nameplate rating.
• Always unplug equipment before cleaning.
• Keep equipment away from water; avoid water jets during cleaning.
• Equipment should only be used in a flat, level position.
• Do not operate unattended.
• Install or locate this equipment only in accordance with the provided
installation instructions.
• Keep equipment and power cord away from open flames, electric
burners or excessive heat.
• Do not operate this equipment if it has a damaged cord or a plug, if it
is not working properly or if it has been damaged or dropped.
• Do not immerse the cord or plug in water. Do not let the cord hang
over the edge of a table or counter.
• Do not use an extension cord with this equipment. Do not plug this
equipment into a power strip or multi-outlet power cord.
• Have qualified personnel install this equipment in accordance with
local codes and ordinances.
• Do not spray controls or outside of equipment with liquids or
cleaning agents.
• Do not clean the equipment with steel wool.
40950
40951
Item No. Model No. Description
Drive Peak HP Voltage Amps Plug
40950 SLM250/S 10
"Blade
Belt
1/3
120
2.5
NEMA
5-15P
40951 SLM300P/S 12
"Blade 2/5 1.8
WARNING
CAUTION
WARNING
Severe injury can occur if this equipment is not used properly.
Produktspezifikationen
| Marke: | Vollrath |
| Kategorie: | Schneidemaschine |
| Modell: | 40950 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Vollrath 40950 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schneidemaschine Vollrath
1 Oktober 2025
1 Oktober 2025
21 August 2025
21 August 2025
7 August 2025
7 August 2025
6 August 2025
6 August 2025
6 August 2025
7 Juli 2025
Bedienungsanleitung Schneidemaschine
- SilverCrest
- Livoo
- Weston
- Esperanza
- Dito Sama
- Philco
- Prince Castle
- Hilti
- Gourmia
- Camry
- Gourmetmaxx
- Breville
- Ernesto
- Trebs
- Krups
Neueste Bedienungsanleitung für -Kategorien-
21 Januar 2026
20 Januar 2026
16 Januar 2026
15 Januar 2026
14 Januar 2026
5 Januar 2026
4 Januar 2026
2 Januar 2026
29 Dezember 2026
8 Dezember 2025