Draper 33321 Bedienungsanleitung

Lies die bedienungsanleitung für Draper 33321 (29 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 8 Bewertungen. Hast du eine Frage zu Draper 33321 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Stock No.33321 Part No.DHS542

Hydraulic Seal

All products in this range are quality checked

and fully guaranteed.

Product description:

D542 Hydraulic Seal is a thixotropic liquid which cures

anaerobically to form a tough, high pressure seal on all

types of threaded couplings used on low, medium and high

pressure lines.

Applications:

D542 is used for all types of hydraulic connections, sealing

against typical pressure line ratings, use Hydraulic Seal to fit

valves, threaded couplings, adaptors, quick disconnect parts,

compression fittings and vibration proofing joints.

Properties:

D542 is tolerant of a light oil film. Seals up to 400 bar,

20mm fittings. Vibration proofs joints. Easily dismantled

with tools.

Instructions for use:

Ensure parts are clean, dry and free from oil and grease.

Procedure for application: Product is normally applied from

the bottle.

Instructions for use:

Ensure parts are clean, dry and free from oil and grease.

Procedure for application:

Product is normally applied from the bottle.

Storage:

Store in a cool area out of direct sunlight.

Shelf life >2 years @20ºC.

Resin

Dimethacrylate

ColourBrown

Fixture speed

no activator

10-20 mins

Fixture speed

with activator

<5 mins

Spindle 2 @ 2.5rpm1000 to 2750 cps

Spindle 2 @ 20 rpm

Flash point

Gap fill

>100ºC

0.05mm to 0.25mm

400 to 800 cps

Shelf life

Specific gravity

2 years @ 20ºC

1.06

Max. operating

temperature

-55°C to +150°C

Typical break and

prevailing

20 N.m/15 N.m

Full cure time

Typical breakaway ISO

10964

Typical prevailing ISO

10964

DIN 10964 breakloose

12 hours

15 N.m

>8 N.m

24 N.m

DIN 10964 prevailing15 to 35 N.m

Produktspezifikationen