Draper 34277 Bedienungsanleitung

Lies die bedienungsanleitung für Draper 34277 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 12 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 2 Bewertungen. Hast du eine Frage zu Draper 34277 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

EN

Original Instructions

Version 2

VOLTAGE TESTER

NON-CONTACT

Version 2: April 2025

Read this manual in full before using this product

and retain it for future use. Always use the latest

version of the manual. Please visit

drapertools.com/manuals for the latest version.

1. Intended Use

This voltage tester is designed to detect AC

voltage in outlets, lighting xtures, circuit

breakers, wire and cables without contact with the

circuit.

Any other application beyond the conditions

established for use will be considered misuse.

Draper Tools accepts no responsibility for

improper use of this product.

2.Specication

Stock No.: 34277

Part No.: VS3

Rated Voltage: 200 - 600V AC

Rated Frequency: 50 - 500Hz

Category Rating: CAT III /600V

Working Temperature: 0 - 40°C

Battery Requirement: 2 × AAA (not supplied)

Net Weight: 46g

34277

3.HealthandSafetyInformation

Important: Read all the Health and Safety

instructions before attempting to operate,

maintain or repair this product. Failure to follow

these instructions may result in injury or damage

to the user, the product or the socket.

WARNING!

Contact with live circuits can

result in severe electrical shock

•  use this product to test for the NEVER

presence of voltages that may be greater than

the rated capability of this device as it may

expose you to a shock hazard.

• Observe all standard precautions and good

practice when working with live electrical

currents.

•  use if the light fails to operate.. DO NOT

• Check the tester before each use and DO NOT

use if any damage or broken or cracked parts.

• Before use check the tester on a known live

circuit.

• The tester must only be used under the

conditions and for the purpose it has been

designed for.

•  immerse this tester in water or DO NOT

expose it to wet conditions.

• DO NOT use this product around explosive

gases, vapours or dust.

•  wear protective insulated gloves ALWAYS

while using this product.

• ALWAYS keep your ngers behind the guard

during use.

Produktspezifikationen