Draper 78773 Bedienungsanleitung
Lies die bedienungsanleitung für Draper 78773 (2 Seiten) kostenlos online; sie gehört zur Kategorie Lötkolben. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 13.5 Bewertungen. Hast du eine Frage zu Draper 78773 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
BLOW TORCH
78773
MICRO BUTANE
EN
Original Instructions
Version 2 – March 2023
1. Specication
2. HealthandSafetyWarnings
• Observe all standard safety precautions and good
practices when working with naked ames and
ammable fuels.
• Keep the work environment clear and well-lit, with
bystanders at a safe distance.
• Keep this product out of reach of children at all times.
• ALWAYS wear appropriate eye and face protection and
protective gloves when using this product.
• Check the torch for damaged, clogged or corroded parts
and leaks before every use.
− DO NOT use the product if it is damaged or leaking
in any way; contact Draper Tools for repair and
replacement options.
− If you suspect that the product is leaking gas, move
it to an external environment immediately.
Important: The product can be tested for leaks by
dabbing soapy water solution on joints and
connections while gas is added to or stored in the
product. Leaks will create a steady feed of soapy
bubbles at the breach point.
• Use ONLY in well-ventilated environments.
• DO NOT use this product in environments where paint
fumes, solvents and other ammable materials are
present.
• Use only good quality butane gas.
WARNING!Butanegasishighlyammable;handle
itcarefullyandinaccordancewiththe
instructions on the canister.
• During rst use, allow a few minutes for the product to
settle once ignited before directing it towards the
workpiece.
WARNING!Themetalpartsofthetorchbecome
veryhotduringuse.DONOTtouchthebarrelor
workpieceuntiltheyhavecooledthoroughly.
WARNING!Avoidcontactwithskin,clothingor
otherammablematerials.
• DO NOT leave the product running while unattended.
• DO NOT expose the product to temperatures above 49°C
(120°F) or to prolonged periods of sunlight.
• ALWAYS switch o the product while it is not in use and
ensure that the control lever remains in its lowest
position.
• After each use, ensure that the ame is fully
extinguished, the control lever is in its lowest position
and the product has completely cooled before storing.
• DO NOT attempt to disassemble or modify this tool in
any way.
• ALWAYS refuel outside.
• NEVER smoke while refuelling.
WARNING!Thisproductisnotinsulatedagainst
electricity.NEVERusethisproductonworkpieces
thatareconnectedtoelectricalpower.
3. Refuelling
WARNING!Beforellingtheproduct,ALWAYS
ensurethatthecontrolleverisinitslowest
position.ONLYusebutanegastofueltheproduct.
Important: This product is not shipped with butane gas
and MUST be fuelled before use.
1 Fig.
(A)
1. Turn the torch upside-down and push the butane
can nozzle rmly into the lling valve (A).
Stock No. 78773
Part No. GT7
Fuel type Butane
Approx. temperature Up to 13,00°C
Operating time (one gas
lling)
20 mins approx. at mid
setting
Dimensions W 90 × H 35 × Ø 20mm
Weight (80% gas ll) 36g
Read this manual in full before using this product and
retain it for future use. Always use the latest version of the
manual. Please visit drapertools.com/manuals for the
latest version of this manual.
Produktspezifikationen
| Marke: | Draper |
| Kategorie: | Lötkolben |
| Modell: | 78773 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Draper 78773 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lötkolben Draper
26 September 2025
26 September 2025
26 September 2025
25 September 2025
25 September 2025
15 Juli 2025
14 Juli 2025
14 Juli 2025
11 Juli 2025
11 Juli 2025
Bedienungsanleitung Lötkolben
- GYS
- Milwaukee
- Ozito
- Cocraft
- Topex
- Weldclass
- Rothenberger
- Telwin
- Fixpoint
- Vonroc
- NEO Tools
- Dremel
- JBC
- Silverline
- Brandson
Neueste Bedienungsanleitung für -Kategorien-
9 Dezember 2025
5 Dezember 2025
24 November 2025
23 November 2025
23 November 2025
17 Oktober 2025
16 Oktober 2025
8 Oktober 2025
7 Oktober 2025
3 Oktober 2025