Edifier W80 Bedienungsanleitung

Lies die bedienungsanleitung für Edifier W80 (8 Seiten) kostenlos online; sie gehört zur Kategorie Kopfhörer. Dieses Handbuch wurde von 32 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 2 Bewertungen. Hast du eine Frage zu Edifier W80 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Wireless Noise Cancelling Over-Ear Headphones

Model: EDF200206

W80

Manual

EN 1. Power ON/OFF

Press and hold the power button to power on/o.

2. First pairing

1. Once powered on, the headphones will automatically enter

Bluetooth pairing mode.

2. Select "EDIFIER W80" from your device list to connect.

1. In ON state, press and hold the " " button for about 3 seconds to

enter Bluetooth pairing mode.

2. Select "EDIFIER W80" from your device list to connect.

Note: For subsequent use, the headphones will automatically connect to the device used last time.

3. Pairing for new device

4. Controls

7. Reset

EDIFIER W80

Bluetooth

EDIFIER W80

Bluetooth

5. Multipoint connection

8. Charging

Input: 5V 1A

Connect the headphones to a power source via the USB-C cable for

charging.

Note: Make sure the USB-C po is completely d before charging.

6. Wired listening

①

EDIFIER W80

Bluetooth

A

EDIFIER W80

Bluetooth

A

B

②

③

5s

1s

1s

ON

OFF

-

-

● Call

● Music

● Mode

x2

x1

x1

x2

x1

x2

x1

x1

x1

Note:

1. "x 1" Press, "x 2" Double press, "—" Press and hold.

2. Default sound control: High Noise Cancellation / Ambient Sound / Noise Cancellation o.

3. Default sound mode: Music Mode/ Game Mode/ Spatial Sound.

4. Download EDIFIER ConneX App to customize more control settings.

1. Pair device A with the headphones successfully.

2. Press and hold the " " button for 3 seconds to re-enter Bluetooth

pairing mode, and then select "EDIFIER W80" in device B settings

to connect.

3. Select "EDIFIER W80" again in device A settings to complete the

multipoint connection.

Note: For subsequent use, the headphones will automatically reconnect to the two devices used

last time.

Connect the AUX audio cable to the headphones.

The wired connection will automatically disable Bluetooth mode.

1. In ON state, press the "+" and "-" buttons for 5 seconds, LED will

blink white until the reset is complete.

2. Then the headphones will automatically enter Bluetooth pairing mode.

Produktspezifikationen