Edifier W800BT SE Bedienungsanleitung

Lies die bedienungsanleitung für Edifier W800BT SE (8 Seiten) kostenlos online; sie gehört zur Kategorie Kopfhörer. Dieses Handbuch wurde von 47 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 4 Bewertungen. Hast du eine Frage zu Edifier W800BT SE oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Wireless Over-Ear Headphones with Active Noise Cancellation

Model: EDF200173

W800BT SE

Manual

EN 1. Power ON/OFF

Press and hold the power button to power on/o.

2. First pairing

1. Once powered on, the headphones will automatically enter

Bluetooth pairing mode.

2. Select "EDIFIER W800BT SE" from your device list to connect.

1. In ON state, press and hold the " " button for about 3 seconds to

enter Bluetooth pairing mode.

2. Select "EDIFIER W800BT SE" from your device list to connect.

Note: For subsequent use, the headphones will automatically connect to the device used last time.

3. Pairing for new device

1. Pair device A with the headphones successfully.

2. Press and hold the " " button for 3 seconds to re-enter Bluetooth

pairing mode, and then select "EDIFIER W800BT SE" in device B

settings to connect.

3. Select "EDIFlER W800BT SE" again in device A settings to connect,

and the multipoint connection is done.

Note: For subsequent use, the headphones wil automatically reconnect to the two devices used

last time.

4. Multipoint connection

5. Charging

Input: 5V 1A

Connect the headphones to a power source via the USB-C cable for

charging.

Note: 1. Make sure the USB-C po is completely d before charging.

2. When charging with a USB-C cable, the product is used as wired headphones and

Bluetooth functions are unavailable.

6. Controls

Note:

1. "x 1" Press , "x 2" Double press, "x 3" Triple press, "—" Press and hold;

2. Download EDlFlER ConneX App for more customizable control settings.

1. In ON state, press the " " button 5 times to nish reset.

2. The headphones will automatically enter Bluetooth pairing

mode if successful.

7. Reset

Connect to the headphones via the USB-C cable. Wired listening will

automatically disable Bluetooth mode.

8. Wired listening

● Call

● Music

● Mode

ON

OFF

-

-

1s

1s

EDIFIER W800BT SE

Bluetooth

EDIFIER W800BT SE

Bluetooth

3s

①

②

③

EDIFIER W800BT SE

Bluetooth

A

EDIFIER W800BT SE

Bluetooth

A

B

x2

x1

x1

x3

x1

x1

x1

x1

x5

x6

Produktspezifikationen