Electro Harmonix Memory Toy Bedienungsanleitung

Lies die bedienungsanleitung für Electro Harmonix Memory Toy (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 31 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 2 Bewertungen. Hast du eine Frage zu Electro Harmonix Memory Toy oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

MEMORY TOY

Analog Delay with Modulation

+Congratulations on your purchase of the Electro-Harmonix MEMORY TOY…a

compact analog delay that takes its heritage from our 1970’s Memory Man and the

legendary Deluxe Memory Man. Like the Memory Boy, the MEMORY TOYis based

on the Deluxe Memory Man analog circuit. A modulation switch allows quick access

to lush analog chorus.

— POWER —

— OPERATING INSTRUCTION and CONTROLS —

Connect your guitar to the INPUT jack of the MEMORY TOY and the AMP jack to

your amplifier. The can be used in combination with other effects MEMORY TOY

devices. Experiment with any combination to develop your own unique sound. The

footswitch toggles between effect and true bypass modes.

DELAY –Controls the delay time of your MEMORY TOY. The range of delay time

is from 30ms to 550ms. Turn the delay time clockwise to increase the delay

amount.

BLEND BLEND–The control allows you to vary the mix of direct and delayed

signals from 100% dry when set counter-clockwise to 100% wet at full clockwise.

FEEDBACK FEEDBACK–The control increases the number of delay repeats or

multiple echoes. At high settings the unit will begin to self-oscillate. Fairly high

feedback with short delay settings produces a reverb type of effect.

MOD Switch –When set to the ON position, the MOD switch will enable a slow

modulation on the delay time similar to the chorus modulation of the Deluxe

Memory Man. Set the MOD switch to the OFF position to disable all modulation.

INPUT JACK –Connect the output of your instrument or another effects pedal to

this jack. The input impedance presented at the INPUT jack is 1 M. 

AMP JACK –Connect the AMP jack to your amplifier input or the input of another

effects pedal.

STATUS LED and FOOTSWITCH –When the STATUS LED is lit, the Memory

Toy is in effect mode. When the LED is off, the Memory Toy is in true bypass

mode. Use the FOOTSWITCH to toggle between the two modes.

Produktspezifikationen