Electro Harmonix Switchblade Bedienungsanleitung
Seiten 4 Englisch Nicht kategorisiert
Lies die Bedienungsanleitung für Electro Harmonix Switchblade kostenlos online oder lade das PDF herunter. Diese Anleitung wurde 188 Mal aufgerufen. Frage zu diesem Modell? Stelle eine Frage
SWITCHBLADE
Channel Selector
Congratulations! You have just purchased the Switchblade Channel Selector. The
Switchblade is capable of carrying out all of your simple switching needs, without
having to worry about batteries and power adaptors.
-OPERATION-
FOOTSWITCH
— Switches the Y jack connection between the A jack and B jack.
The Switchblade can be used in two directions, meaning the signal path can flow from A/B to
Y,
or
from Y to A/B.
Using the Switchblade to switch between two instruments: plug the instruments into jack A
and jack B using ¼” instrument cables. Then connect jack Y to the next device in your signal
chain (effects, if any, or amplifier if none). Use the footswitch to switch between the
instruments.
Using the Switchblade to switch between two amplifiers: plug the amplifiers into jack A and
jack B using ¼” instrument cables. Then connect jack Y to the previous device in your signal
chain (effects, if any, or instrument if none). Use the footswitch to switch between
amplifiers.
The Switchblade is not limited the above two applications. Here are two more application
examples:
Y: Instrument
→
Effects chain A, effects chain B
Y: Amplifier head
→
Speaker cabinet A, speaker cabinet B (be sure to use
speaker
cable and not instrument cable for this application).
The Switchblade is a passive device and requires no power supply, such as a battery or
power adapter. The Switchblade does not support stereo use and will only work with ¼”
mono cables.
Produktspezifikationen
| Marke: | Electro Harmonix |
| Kategorie: | Nicht kategorisiert |
| Modell: | Switchblade |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Electro Harmonix Switchblade benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten