Electro-Voice RE420 Bedienungsanleitung

Lies die bedienungsanleitung für Electro-Voice RE420 (2 Seiten) kostenlos online; sie gehört zur Kategorie Mikrofon. Dieses Handbuch wurde von 37 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 19 Bewertungen. Hast du eine Frage zu Electro-Voice RE420 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Electro-Voice | RE420 Condenser cardioid vocal

microphone

RE420 Condenser

cardioid vocal

microphone

▪Premium condenser element delivers a highly-

detailed, rich, and full bodied sound

▪Cardioid polar pattern provides excellent acoustic

isolation with a comfortable working range

▪Multi-stage pop filter minimizes breath blasts and

plosives

▪Selectable high-pass filter reduces undesirable low

frequency content when engaged

▪Vibration-absorbing internal shock mount minimizes

handling noise

The RE420 is a premium-grade, high-performance,

condenser cardioid vocal microphone. Designed to

reveal the exceptional detail and vivid clarity

synonymous with condenser elements, it skillfully

delivers the lyrical finesse required for expressive

vocal performances.

The sonic signature is rich, detailed and full-bodied,

with a warm and clear low end, natural and present

midrange, and an open, crisp and detailed high end.

The cardioid pattern provides excellent acoustic

isolation. Maximum feedback rejection occurs when a

stage monitor is positioned 180° off-axis to the

element. This pattern also allows for a comfortable

working range around the microphone making

expressive microphone techniques easy.

The multi-stage pop filter consists of two layers of

dense foam separated by air, which attenuates wind

velocity caused by breath and windblasts.

The high-pass filter has two positions (see drawing).

The flat position delivers the full frequency band pass

of the capsule. The high-pass position attenuates

frequencies below 150 Hz.

The internal shock mount isolates the microphone

element from vibration and guards against handling

noise.

Technical specifications

Element type:Self-biased condenser

Frequency response:50 Hz-20 kHz (see chart)

Polar pattern:Cardioid

Sensitivity, open circuit

voltage, 1 kHz:

5.6 mV/Pascal

(-45 dBV/Pa)

Clipping (max SPL):149 dB SPL (1% THD)

Self noise:22 dB SPL "A" weighed (0 dB=20 μPa)

Dynamic range:127 dB

Signal-to-Noise ratio:72 dB

Output impedance:200 ohms

Power requirements:48 VDC phantom power

Polarity:Positive pressure on diaphragm

produces positive voltage on pin 2

relative to pin 3

Microphone connector:3-pin, XLR-type

Finish:Black polyurethane paint

Materials:Zinc die cast, steel wire cloth grille

Produktspezifikationen