Electro-Voice RE520 Bedienungsanleitung

Lies die bedienungsanleitung für Electro-Voice RE520 (2 Seiten) kostenlos online; sie gehört zur Kategorie Mikrofon. Dieses Handbuch wurde von 41 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 21 Bewertungen. Hast du eine Frage zu Electro-Voice RE520 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Electro-Voice | RE520 Condenser supercardioid vocal

microphone

RE520 Condenser

supercardioid vocal

microphone

▪Premium condenser element delivers a highly-

detailed, full, and vivid sound

▪Supercardioid polar pattern provides excellent

acoustic isolation and feedback control

▪Multi-stage pop filter minimizes breath blasts and

plosives

▪Selectable high-pass filter reduces undesirable low

frequency content when engaged

▪Vibration-absorbing internal shock mount minimizes

handling noise

The RE520 is a premium-grade, high-performance,

condenser supercardioid vocal microphone. Designed

to reveal the exceptional detail and vivid clarity

synonymous with condenser elements, it elegantly

delivers the lyrical finesse required for expressive

vocal performances, while controlling off-axis sound

from near-by sources.

The sonic signature is detailed, full and vivid, with a

warm and clear low end, natural and present

midrange, and an open, crisp and detailed high end.

The supercardioid pattern provides excellent acoustic

isolation. Maximum feedback rejection occurs when a

stage monitor position is at either 225° or 125° off-

axis to the element. This pattern also allows for a

cleaner mix due to its rejection of off-axis sound.

The multi-stage pop filter consists of two layers of

dense foam separated by air, which attenuates wind

velocity caused by breath and windblasts.

The high-pass filter has two positions (see drawing).

The flat position delivers the full frequency band pass

of the capsule. The high-pass position attenuates

frequencies below 150 Hz.

The internal shock mount isolates the microphone

element from vibration and guards against handling

noise.

Technical specifications

Element type:Self-biased condenser

Frequency response:40 Hz-20 kHz (see chart)

Polar pattern:Supercardioid

Sensitivity, open circuit

voltage, 1 kHz:

5.6 mV/Pascal

(-45 dBV/Pa)

Clipping (max SPL):150 dB SPL (1% THD)

Self noise:17 dB SPL "A" weighed (0 dB=20 μPa)

Dynamic range:133 dB

Signal-to-Noise ratio:77 dB

Output impedance:200 ohms

Power requirements:48 VDC phantom power

Polarity:Positive pressure on diaphragm

produces positive voltage on pin 2

relative to pin 3

Microphone connector:3-pin, XLR-type

Finish:Black polyurethane paint

Produktspezifikationen