Eliminator Lighting Electro Ray Bedienungsanleitung

Lies die bedienungsanleitung für Eliminator Lighting Electro Ray (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 13 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 8 Bewertungen. Hast du eine Frage zu Eliminator Lighting Electro Ray oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Electro Ray

SPECIFICATIONS:

Model: Electro Ray

Supply Voltage: 90~240V / 50~60Hz

LEDs: 3 x 3W (1 Red, 1 Blue, 1

Green

Power Consumption: 20W

Beam Angle: 90 Degrees

Weight: 4 lbs./ 1.8 kgs

Size: 8.26”H x 12.5”W x 11”L

Fuse: 2 Amp

Working Position: Any Safe position

Duty Cycle: None

Colors: RGB

Warranty: 1 Year

CAUTION! Please read and understand these instructions before installing or operating this unit.

Introduction:

The Electro Ray is a powerful effect for clubs and

dj’s. The Electro Ray is bright, colorful, moonflower

effect. This unit features an internal microphone

that allows the beams to be triggered by sound.

The Electro Ray’s beams rotate and strobe to the

beat of the music. The Electro Ray is ready to be

hung or set on the ground in a safe position. When

mounting this unit to truss be sure to use a clamp.

Plug the unit in to a standard 110 wall outlet.

Fuse Replacement:

Caution! Never open unit when in use. Always dis-

connect main power before servcing. Remember to

always replace with the exact same type fuse. Locate

and remove the unit’s power cord. Once the cord

has been removed located the fuse holder located

inside the power socket. Insert a flat-head screw

driver into the power socket and gently pry out the

fuse holder. Remove the bad fuse and replace with

a new one. The fuse holder has a built-in socket for

a spare fuse be sure not to confuse the spare fuse

with active fuse.

©Eliminator® Los Angeles, CA. - wwwEliminatorLighting.com

CHANNEL

CHANNEL CHANNEL

CHANNEL

CH4

manual or sound green light dim

0-255dim

0-255

CH5

manual or sound blue light dim

dim

CH3

0-255dim

CH2

led beam angle

led auto scan fast--slow

led auto scan slow--fast

CH1

192-255

128-191auto slow--fast

100-127off

0-1on

manual or sound red light dim

2-99strobe slow--fast

0-127

128-191

sound slow--fast

192-255

VALUE

VALUE VALUE

VALUEFUNCTION

FUNCTIONFUNCTION

FUNCTION

Strobe, auto, sound active

Produktspezifikationen