Eliminator Lighting Trio Par LED Bedienungsanleitung

Lies die bedienungsanleitung für Eliminator Lighting Trio Par LED (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 15 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 3 Bewertungen. Hast du eine Frage zu Eliminator Lighting Trio Par LED oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

TRIO PAR LED

SPECIFICATIONS:

Model: Trio Par LED

Voltage: 100V-240V 50/60Hz

LEDs: 9 x 4W RGBW LEDs

1 x 15W RGBW LED

24 SMD White LEDs

Fuse: 5A

Weight: 2lbs./ 0.9kgs.

Size: 9.8”(L) x 3.5”(W) x 9.8”(H)

Working Position: Any Safe position

Duty Cycle: None

DMX Channels: 4 DMX Channel Modes:

9/13/22/26 Channels

Colors: RGBW

Warranty: 1 Year

CAUTION! Please read and under-

stand these instructions before

installing or operating this unit.

Operating Instructions:

The Trio Par LED has been tested at the factory, there is no assembly required. The unit is ready to

be plugged into a power outlet. This unit has 4 DMX channel modes; 9/13/22/26 channels. It has

6 operating modes; RGBW dimmer mode (outside ring, center LEDs, and SMD LEDs), color jump

change mode, pulse change mode, fade mode, sound active mode, or DMX control.

Fuse Replacement: Disconnect the unit from its power source. Remove the power cord from the

unit. Once the cord has been removed, you will find that the fuse holder is located inside the power

socket. Insert a flat-head screw driver into the power socket and gently pry out the fuse holder.

Remove the bad fuse and replace with a new one. The fuse holder also has a holder for a spare fuse.

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

Caution! Never open unit when in use. Always

disconnect main power before replacing fuse.

Remember to always replace with the exact same

type fuse.

1 Year Limited Warranty:Eliminator Lighting warranty is valid from the date of purchase. Our

1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with

dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover

items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty

is only valid with-in the United States.

Produktspezifikationen