Eliminator Lighting Motion 60 LED Bedienungsanleitung

Lies die bedienungsanleitung für Eliminator Lighting Motion 60 LED (5 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 4 Bewertungen. Hast du eine Frage zu Eliminator Lighting Motion 60 LED oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Motion 60 LED

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

Introduction:

This unit can be either an 8 or 13 channel DMX intelligent moving head unit. The Motion 60 LED has 4 operat-

ing modes; sound active mode, show mode, auto run mode or it can be controlled by a DMX controller. The

unit can be run as a stand alone unit or in a Master/Slave configuration. This unit has been tested and the

lamp has been installed at the factory, there is no assembly required. The unit is ready to be plugged in to a

power outlet. There are no dipswitch settings for Master/Slave mode, just simply link the units together. To

enhance the beams effects you can use a fog machine. This unit looks good in pairs.

CAUTION! Please read and understand these instructions before installing or operating this unit.

SPECIFICATIONS:

Model: Motion 60 LED

LED: 1 x 60W White LED

Weight: 20lbs./ 9.0kgs.

Size: 10.75” (L) x 8.85” (W) x

15.75” (H)

Fuse: 2 Amp

Supply Voltage: 110V-130V 50/60Hz

Power Consumption:100W

Working Position: Any Safe position

Duty Cycle: None

DMX Channels: 2 DMX Channel Modes:

8 Channel Mode &

13 Channel Mode

Gobos: 7 + Spot

Colors: 8 Colors + White

Warranty: 1 Year

CAUTION! Please read and

understand these instructions

before installing or operating

this unit.

Fuse Replacement:Locate and remove

the unit’s power cord. Once the cord has

been removed located the fuse holder

located inside the power socket. Insert

a flat-head screw driver into the power

socket and gently pry out the fuse holder.

Remove the bad fuse and replace with a

new one. The fuse holder has a built-in

socket for a spare fuse be sure not to

confuse the spare fuse with active fuse.

Produktspezifikationen