Eliminator Lighting Electro Strip Bedienungsanleitung

Lies die bedienungsanleitung für Eliminator Lighting Electro Strip (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 9 Bewertungen. Hast du eine Frage zu Eliminator Lighting Electro Strip oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Electro Strip

SPECIFICATIONS:

Model: Electro Strip

LEDs: 192 - 64 Red, 64 Green,

& 64 Blue

Weight: 3.3lbs./ 1.5kgs.

Size: 19” (L) x 3.8” (W) x

5.1” (H)

Fuse: 2 Amp

Supply Voltage: 120V

Power Cord Daisy Chain: 33 Fixtures Max.

Working Position: Any Safe position

Duty Cycle: None

DMX Channels: 4

Colors: RGB

Warranty: 1 Year

CAUTION! Please read and

understand these instructions

before installing or operating

this unit.

Operating Instructions:

The Electro Strip has been tested at the factory, there is no assembly required. The unit is ready to

be plugged into a power outlet. This unit is a 4 channel DMX intelligent LED bar. This unit has 4 dif-

ferent operating modes; static color mode, chase mode, color change mode, and DMX controlled.

This unit can be run as a Stand Alone unit or in a Master/Slave configuration. For stand-alone mode,

and Master/Slave configuration settings, see other side.

Power Cord Daisy Chaining: With this feature you can connect the xtures to one another using the

IEC input and output sockets. The quantity that can be connected is 33 xtures maximum. After 33 x-

tures you will need to use a new power outlet. They must be the same xtures. DO NOT mix xtures.

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

Caution! Never open unit when in use. Always disconnect main power before replacing fuse.

Remember to always replace with the exact same type fuse.

1 Year Limited Warranty:Eliminator Lighting warranty is valid from the date of purchase. Our

1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with

dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover

items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty

is only valid with-in the United States.

Produktspezifikationen