Eliminator Lighting Stealth Beam Bedienungsanleitung

Lies die bedienungsanleitung für Eliminator Lighting Stealth Beam (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 63 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 32 Bewertungen. Hast du eine Frage zu Eliminator Lighting Stealth Beam oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

STEALTH BEAM

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

Introduction:

The Stealth Beam is a DMX intelligent moving head unit. The Stealth Beam has 3 operating modes;

sound active mode, show mode, or controlled via DMX controller. The Stealth Beam has 2 DMX

Channel modes; 5 or 17 channels. The unit can be run as a stand alone unit or in a Master/Slave set

up. This unit has been tested and there is no assembly required. Follow the instructions on the

following pages to operate your fixture. To enhance the beams effects you can use a fog machine.

CAUTION! Please read and understand these instructions before installing or operating this unit.

SPECIFICATIONS:

Model: Stealth Beam

Supply Voltage: 100V-240V 50/60Hz

LED: 1 x 60W RGBW 4-in-1 LED

Weight: 8.5lbs./ 3.8 kgs.

Size: 5.75” (L) x 9.4” (W) x 11.22” (H)

Fuse: 2 Amp

Power Consumption:75W

Working Position: Any Safe position

Duty Cycle: None

DMX Channels: 2 DMX Channel Modes:

5 Channel Mode &

17 Channel Mode

Colors: RGBW

Warranty: 1 Year

CAUTION! Please read and

understand these instructions

before installing or operating

this unit.

Fuse Replacement:Locate and remove

the unit’s power cord. Once the cord

has been removed, the fuse holder is

located inside the power socket. Insert

a flat-head screw driver into the fuse

holder and gently pry out the holder.

Remove the bad fuse and replace with

a new one. The fuse holder has a built-in

second holder for a spare fuse.

Produktspezifikationen