Eliminator Lighting Stealth Craze Bedienungsanleitung

Lies die bedienungsanleitung für Eliminator Lighting Stealth Craze (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 37 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 3 Bewertungen. Hast du eine Frage zu Eliminator Lighting Stealth Craze oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

STEALTH CRAZE

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

Introduction:

The Stealth Craze is a unique DMX intelligent moving head unit. The Stealth Craze has 3 operating

modes; sound active mode, show mode, or controlled via DMX controller. The Stealth Craze has 2

DMX Channel modes; 5 or 16 channels. The unit can be run as a stand alone unit or in a Master/

Slave set up. This unit has been tested and there is no assembly required. Follow the instructions

on the following pages to operate your fixture. To enhance the beams effects you can use a fog

machine.

CAUTION! Please read and understand these instructions before installing or operating this unit.

SPECIFICATIONS:

Model: Stealth Craze

Supply Voltage: 100V-240V 50/60Hz

LED: 4 x 10W White LED’s

Weight: 10lbs./ 4.5 kgs.

Size: 6.69” (L) x 9.4” (W) x 12.63” (H)

Fuse: 2 Amp

Power Consumption:55W

Working Position: Any Safe position

Duty Cycle: None

DMX Channels: 2 DMX Channel Modes:

5 Channel Mode &

16 Channel Mode

Colors: 3 Colors + White

Warranty: 1 Year

CAUTION! Please read and

understand these instructions

before installing or operating

this unit.

Fuse Replacement: Locate and remove

the unit’s power cord. Once the cord

has been removed, the fuse holder is

located inside the power socket. Insert

a flat-head screw driver into the fuse

holder and gently pry out the holder.

Remove the bad fuse and replace with

a new one. The fuse holder has a built-in

second holder for a spare fuse.

Produktspezifikationen