Erica Synths BBD Delay/Flanger Bedienungsanleitung

Lies die bedienungsanleitung für Erica Synths BBD Delay/Flanger (78 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 9 Bewertungen. Hast du eine Frage zu Erica Synths BBD Delay/Flanger oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

GUIDE TO ASSEMBLY OF ERICA SYNTHSDIY BBDDELAY/FLANGER

If you are reading this, most probably, you

are about to build Erica Synths DIY BBD

DELAY/FLANGER module. The module is 14HP

wide, 45mm deep, skiff friendly, has solid

mechanical construction and doesn’t require

wiring.

Erica Synths DIY BBD Delay /FLANGER is one

of few BBD (bucket brigade delay) chips based DIY

modules. The module is designed to provide

variety of effects from flangerto delays with

adjustable flavours and plenty of modulation

possibilities. It has built in LFO with selectable

shape and dedicated LFO output, delay time CV

input with an attenuator, selectable feedback

overdrive and feedback Send-Return connectors,

so you can apply external effects on feedback

signal. Maximums feedback settings put the

module in self oscillation, so it can be used as an

experimental sound source, as well.

The DIY kit comes in three versions:

1)Set of 2 PCBs + BBD ICs (V3205 and V3102),

2)Set of 2 PCBs + BBD ICs + mechanical parts

(PCB connectors and spacer)+ panel,

3)Full kit.

FEATURES:

•4092 stage BBD

•Up to 300ms delay time

•Delay time CV input with an attenuator

•Feedback Send-Return circuit for external

effects

•Built in LFO with dedicated output

•Two customizable feedback overdrive flavours

•LP filter on the output with selectable cutoff

•Dedicated Wet output

SPECIFICATIONS:

•Max Delay time300ms

•Audio output amplitude10Vptp

•CV amplitude (full span)-5V -+5V

•Panel width14HP

•Module depth45mm

•Power consumption30mA @+12V,

20mA@-12V

1

2

3

4

5

6

7

8

The big knob sets delay time from 0 CCW to 300ms CW.

The COLOUR switch applies the LP filter of two selectable cutoff

frequencies on the output. Mid position means –no filter applied,

top position is “Darker”, bottom position “Dark”. Use the filter with

low frequency audio on the input!

Select one of two feedback signal overdrive flavours

Adjust feedback level! In full CW setting the module will go to self

oscillation

This is the Dry/Wet crossfade control

Adjust the audio input level! DDB Delays are sensitive to the audio

input level, so experiment with settings to get different results!

9

This is the delay time CV attenuator. It’s internally patched to built

in LFO, but when you patch a external modulation signal, the

internal connection is replaced by the external one

10

This is the feedback FX Send output, meaning, you can break the

feedback path and send the feedback signal to external modifiers,

multimode filter, for example

11

This is the feedback FX return input. Patch the modified signal back

here!

12

This is the audio signal input. Adjust the signal level for various effect

flavours!

13

14

15

Select the built in LFO shape

Adjust the built in LFO frequency. The LFO is internally routed to the

delay time CV through the MOD LEVEL attenuator. The LED will give

visual feedback on the LFO rate.

This is the wet signal output. Here you have another audio

signal to build some interesting patches

1

3

4

2

5

8

7

9

6

10

11

121314

15

15

15

16

This is the output of the module. We believe, you’ll enjoy

results!

16

This is the LFO output. You can use the built in LFO to modulate

other modules in your rack and have interesting synced effects

This is the delay time CV input

Produktspezifikationen