Erica Synths Cymbals Bedienungsanleitung

Lies die bedienungsanleitung für Erica Synths Cymbals (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 3 Bewertungen. Hast du eine Frage zu Erica Synths Cymbals oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

CYBALS

Set the master Tune of Cymbals. This affects both Cymbals

simultaneously, and essentially controls the sample playback rate

Select one of 10 sets of Cymbal samples

These are cymbal “looping”switches. When they are on,

after initial hit, a certain portion of the sample starts to loop

during envelope generator decay until the VCA closes

completely. This creates a feeling of delay applied to the

cymbal. Note that looping works the best on long decay.

Adjust Crash Cymbal decay time manually

Adjust Ride Cymbal decay time manually

This is Tune CV level attenuator

This is Decay CV level attenuator. It effects both

Cymbals simultaneously

Use the manual trigger buttons to check the Cymbal

settings and add some beats during live performance

This is Tune CV input

This is the Accent input. +10V CV will set the Cymbals

to the maximum volume, and it affects both Cymbals

simultaneously. The accent sensitivity is adjustable –

please, refer to instructions in this manual

These are Trigger inputs. The LEDs indicate incoming triggers

These are Decay CV inputs

This is Crash Cymbal output

This is Ride Cymbal output and the Main output of the

module – when nothing is patched in the Crash Cymbal

output, it’s automatically mixed to the Ride Cymbal output

TUNE

SELECT

CRASH LOOP,RIDE LOOP

CRASH DECAY

RIDE DECAY

TUNE CV

DECAY CV

TUNE CV

CR TRIG,RD TRIG

CR D CV,RD D CV

CR OUT

ACC

RD OUT

CR TRIGTUNE CVCR D CVTCR OU

RD TRIGCV ACRD D CRDOUT

TUNE

DECAY CVTUNE CV

RIDE DECAYCRASH DECAY

SELECT

CYBALS

CRASH

LOOP

RIDE

LOOP

Produktspezifikationen