ESI Amber i4 Bedienungsanleitung
ESI
DJ Ausrüstung
Amber i4
Lies die bedienungsanleitung für ESI Amber i4 (3 Seiten) kostenlos online; sie gehört zur Kategorie DJ Ausrüstung. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 3 Bewertungen. Hast du eine Frage zu ESI Amber i4 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/3
Quick Start Guide
4-in / 4-out Professional 24-bit / 192kHz
USB-C Audio Interface
Introduction
Congratulations on your purchase of Amber i4
, a professional 4-in / 4-out USB-C audio
interface with 24-bit / 192kHz for Mac and PC to connect microphones, synthesizers,
guitars and more and to monitor signals via headphones or studio monitors. Amber i4
has a number of innovative features that many comparable products do not have,
because of this we strongly recommend to check this
Quick Start Guide in detail and if
needed, to have a look at the full
User's Guide that is available on our website
( ).http://en.esi.ms/130
Getting Started
To start using Amber i4,
connect it to your computer using one of the included USB
cables. We include cables for so-called "type A" and "type C" ports on the computer. If
you want to connect it to a mobile device such as an iPhone or iPad, you might need an
adapter - depending on the device. Once connected, turn it on with the power switch
that is located on the backside. The LCD will greet you with an i4
logo while powering
up. It is a good time now to either connect headphones to the first headphone connector
on the front or to use the TRS outputs on the back to connect the interface to active
studio monitors. You will not be able to listen to any audio signals otherwise.
On the Mac, Amber i4
does not require any drivers to be used (plug-and-play), however
you can download a control panel application on our website (http://en.esi.ms/130 ) that
is strongly recommended. On iPhone or iPad, most audio apps will automatically use
the interface after it has been connected. For Windows users, we provide a driver
optimized for professional audio applications (incl. ASIO support) that is available for
download ( ). Also the driver installs the control panel application http://en.esi.ms/130
that you need to use to control many of the advanced features.
Recording and Playback
To check if Amber i4
is working with your computer, it is best to play music as a test
signal via headphones or your studio monitors. Make sure you set the output volume not
too loud for your ears.
You can record audio in your favorite audio application (i.e. a DAW like Bitwig Studio
8-Track or an audio recorder like WaveLab LE) after selecting Amber i4
as recording
and playback device in its settings dialog (refer to the manual of your software).
Once you start the recording process of microphone or guitar signals, slowly turn up the
corresponding gain knob clockwise until the input level meters on the LCD screen and
in your software show a proper signal level. Orange usually indicates an optimal level
and red means that the level is too high (i.e. the signal clips) and the gain has to be
reduced. no gain adjustment is required.When recording line level signals,
Display and Functions
The standard view of the LCD screen shows the active signal levels for input channels
1/2 and 3/4 on the left side and the playback levels (DAW signal) for channels 1/2 and
3/4 on the right as level meters.
You can see the output / volume as a horizontal line shown over output channel 1/2.MASTER
In the bottom row you can see the active input signal for channel 1 and 2 ( - with or Mic
without 48V phantom power, and ).Hi-Z Line
Next to it you can see the MIDI activity for ports and with flashing numbers. MIDI 1 2
A green number shows input activity, a red number output activity.
On the right, you can see the output signal routing for and and LINE OUT A LINE OUT B
you can see what is being sent to and .HEADPHONES 1 HEADPHONES 2
The SELECT encoder and button allow you together with the MONITORING
MUTE/ENTER push button to control the Advanced Direct Monitoring features. When
used, a separate view screen will be displayed on the LCD.
The MIX encoder allows you to control the mix and balance between the input signal
(IN) and the output / playback signal ( ). The mix itself will be displayed in a DAW
separate view screen.
The OUTPUT A/B button allows you to change the output signal routing for LINE OUT A
Produktspezifikationen
| Marke: | ESI |
| Kategorie: | DJ Ausrüstung |
| Modell: | Amber i4 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit ESI Amber i4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung DJ Ausrüstung ESI
14 Juni 2025
14 Juni 2025
21 August 2024
28 Juli 2024
13 Juli 2024
9 April 2024
16 Januar 2024
Bedienungsanleitung DJ Ausrüstung
- Fuzzix
- American DJ
- Rode
- Steinberg
- Apogee
- Zomo
- NAD
- DB Technologies
- EVO
- Ortofon
- Victrola
- NewStar
- RME
- Tascam
- IMG Stage Line
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
11 Juni 2025
1 Juni 2025
15 Oktober 2024
8 Oktober 2024
2 Oktober 2024
29 September 2024
28 September 2024
27 September 2024
26 September 2024