ET2 Alumilux E41540-SA Bedienungsanleitung

ET2 Erleichterung Alumilux E41540-SA

Lies die bedienungsanleitung für ET2 Alumilux E41540-SA (2 Seiten) kostenlos online; sie gehört zur Kategorie Erleichterung. Dieses Handbuch wurde von 22 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 11.5 Bewertungen. Hast du eine Frage zu ET2 Alumilux E41540-SA oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
C o n t e m p o r a r y
L i g h t i n g
PRODUCT NAME: Alumilux
ITEM NUMBER: E41540-SA / E41540-WT
Please consult your electrician for hanging fixture and wiring.
MADE IN CHINA
Page 1 of (2)
To prevent water intrusion, caulk around back-plate
where fixture meets the wall using outdoor silicone
sealant. Leave a small gap at the bottom to allow
moisture to exit.
WARNING: Wires need to be connected to driver found
in canopy and should not be connected directly to
power source or a short may occur.
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
2.)
Page 2 of (2)
1.)
3.)
4.)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
C
D
A
B
A
B
C
D
(A)
Backplate
(B)
Mounting bracket
(C)
Wire Nuts (x3)
(D)
Mounting screws (x2)
Step.4: Caulk around fixture with outdoor
silicone sealant to prevent water intrusion.
Leave a small gap at the bottom to allow
moisture to escape. Install fixture to back
plate (B) and tighten mounting screws (D)
to secure.
Step.1: Install Mounting bracket(A) to outlet box.
Step.2: Wire fixture to wires in outlet box.
Green/Copper wire is for Ground.
Step.3: Install Backplate(B) to Mounting
bracket(A).


Produktspezifikationen

Marke: ET2
Kategorie: Erleichterung
Modell: Alumilux E41540-SA

Brauchst du Hilfe?

Wenn Sie Hilfe mit ET2 Alumilux E41540-SA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten