EtherWAN EDGE 3 Bedienungsanleitung
Seiten 3 Nicht kategorisiert
Lies die Bedienungsanleitung für EtherWAN EDGE 3 kostenlos online oder lade das PDF herunter. Diese Anleitung wurde 1 Mal aufgerufen. Frage zu diesem Modell? Stelle eine Frage

W70G- EDGE3-A- Page 1 Q1
Copyright 2026 EtherWAN Systems, Inc. All Rights Reserved May/6 25/202
Installation Guie
EDGE3 Series | Industrial IoT Wi-Fi Halow Transmitter
Unpacking
Open the carton and unpack the items. Your package should include:
▪One EDGE3-A-(XX), IEEE802.11ah antenna, WiFi antenna and Terminal Block.
Note that the (XX) indicates country models.
If any items are missing or damaged, notify your EtherWAN representative. If
possible, save the carton and packing material in case you need to ship or store
the device in the future.
Management Webpage Login
1.The system is ready 1.5 mins after power-on.
2.Default IP Address: 192.168.1.10/ subnet mask 255.255.255.0
3.Access the EDGE3-A management webpage via a wired ethernet cable or WiFi
5. EDGE3-A default disables DHCP server. Please set a static IP address for
laptop or desktop. (For example, 192.168.1.250/255.255.255.0)
4.Login using secure HTTPS
5.Account: admin
6.Password: (please check the label on the side of the EDGE3-A.)
EDGE3 Halow Network Architecture Setting
1The EDGE3-A connectivity is 1 AP mode connecting 50 Stations.
2All EDGE3-As ship with 11ah Halow disable.
3Choose any EDGE3-A and set it to AP mode.
3.1Web login https://192.168.1.10
3.2Networking/Device IP set static IP
3.3Networking/ WiFi/ 11ah enable and mode AP
3.4Record the AP mode SSID and Password for the STA to connect.
3.5Save/ make sure Save & Apply .
4Configure all other EDGE3-As to 11ah Enable and Station mode, with the
same SSID and Password as the AP device.
4.1Web login https://192.168.1.10
4.2Networking/Device IP set static IP
4.3Networking/ WiFi/ 11ah enable and mode STA, and use the same SSID
and password as the AP device.
4.4Save/ make sure Save & Apply .
5Mode and Display
Setup Procedures:
Modify IP
Save & Apply
Set 11ah mode
Save & Apply
Setup Procedures:
Modify IP
Save & Apply
Set 11ah mode
Save & Apply
Produktspezifikationen
| Marke: | EtherWAN |
| Kategorie: | Nicht kategorisiert |
| Modell: | EDGE 3 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit EtherWAN EDGE 3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten