EtherWAN EX46910F Bedienungsanleitung
Seiten 2 Schalter
Lies die Bedienungsanleitung für EtherWAN EX46910F kostenlos online oder lade das PDF herunter. 17 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
Copyright 2022 EtherWAN Systems, Inc.Page 1
All Rights Reserved
EX46910F
8/2/2022
EX46910F Hardened PoE Switch
Installation Guide
1 Unpacking
Unpack the items. Your package should
include:
One EX46910F PoE switch
Power input terminal block
Wall and DIN-Rail mounting hardware
brackets
If items are missing or damaged, notify your
EtherWAN representative. Keep the carton
and packing material.
More information available at:
https://www.etherwan.com/us
For warranty information, visit:
https://www.etherwan.com/us/support/war
ranty-policy
2 Equipment Needed
Category 5e or better cable for RJ-45
ports
48VDC power supply with voltage
adjustable up to 56VDC and power output
to handle 240W PoE power budget.
3 Select a Location
DIN-rail installations: Attach the bracket
on the unit using the included screws and
then mount on a DIN-rail.
Wall installations: Attach the brackets on
the unit using the included screws and
then mount on a wall.
Identify a power source within 6 feet (1.8
meters).
Choose a dry area with ambient
temperature between -40 and 75ºC (-40
and 167ºF).
Keep away from heat sources, sunlight,
warm air exhausts, hot-air vents, and
heaters.
Make sure there is adequate airflow.
4 Connect to the Ports
The EX46910F has the following ports:
8 10/100/1000 Mbps PoE ports
2 1000 Mbps SFP slots
10/100/1000BASE-T Ports
Ports 1 to 8 are gigabit copper ports that are
compliant with IEEE 802.3af/at PoE protocol,
with up to 30W power output per port.
SFP Slots
Ports 9 and 10 are 1000BASE SFP slots.
5 Connect Power
Terminal Block
Connect the unit to a suitable power supply
using appropriate wire, 18-24 AWG, rated for
105°C or higher.
Redundant power is supported. However,
only one power input is required to operate
the unit.
1.Connect power wires to the
appropriate P1+/- or P2+/- pins on
the terminal block.
2.Connect the grounding wire to the
ground screw.
3.Plug the terminal block into the
socket.
4.Alternatively, connect power 3 to an
external power adapter.
Relay Output Alarm
The switch provides relay output contacts for
redundant power. The relay output can be
connected to an alarm signaling device. The
current capacity is 1A@24VDC.
When dual power sources are connected,
the circuit is open.
When a single power source is connected
the circuit is closed.
The relay works with only power 1 and
power 2. It is not connected to power 3.
Produktspezifikationen
| Marke: | EtherWAN |
| Kategorie: | Schalter |
| Modell: | EX46910F |
Brauchst du Hilfe?
Wenn Sie Hilfe mit EtherWAN EX46910F benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schalter EtherWAN
EtherWAN EG97023 Bedienungsanleitung EtherWAN EX78162 Bedienungsanleitung EtherWAN EX78900E Bedienungsanleitung EtherWAN EX29000 Bedienungsanleitung EtherWAN EX17082A Bedienungsanleitung EtherWAN EX17008 Bedienungsanleitung EtherWAN EX70900 Bedienungsanleitung EtherWAN IG5 L Rack Bedienungsanleitung
Alle EtherWAN Schalter Bedienungsanleitungen
Beliebt in Schalter
EtherWAN EX73900X Bedienungsanleitung EtherWAN EX77000 Bedienungsanleitung EtherWAN EX78900G Bedienungsanleitung
Bedienungsanleitung Schalter
Neueste Bedienungsanleitungen für Schalter
Lanberg RSGE-24 Bedienungsanleitung D-Link DXS-1210-10MP Bedienungsanleitung EMOS A6003.0 Bedienungsanleitung Longshine LCS-GS8424 Bedienungsanleitung Advantech EKI-5708E-I Bedienungsanleitung Lanberg RSFE-24P-2C-360 Bedienungsanleitung Lanberg DSP1-1005 Bedienungsanleitung Huawei S310-48T4S Bedienungsanleitung InLine 32308A Bedienungsanleitung Allied Telesis AT-FS980M/18PS Bedienungsanleitung