EtherWAN EX72000 Bedienungsanleitung
Seiten 2 Schalter
Lies die Bedienungsanleitung für EtherWAN EX72000 kostenlos online oder lade das PDF herunter. 12 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
Copyright
©
2014 EtherWAN Systems, Inc. Page 1
All Rights Reserved
EX72000 rev. 1.0
12/2/2014
1 Unpacking
Unpack the items. Your package should include:
One EX72000 Series hardened managed
switch
Rack-mounting hardware brackets
One CD containing this user’s guide
If items are missing or damaged, notify your
EtherWAN representative. Keep the cartonand
packing material.
2 What Else You Need
Appropriate cables for dataports
Personal computer or laptop
3 Selecta Location
Desktop installations: Mount ona flat table
or shelf surface.
Rack installations: Use a 19-inch (48.3-
centimeter) EIA standard equipment rack
that is grounded and physically secure.
Identifya power source within 6 feet (1.8
meters).
Choose a dry area with ambient temperature
between -40 and 75ºC (-40 and 167ºF).
Keep away from heat sources, sunlight, warm
air exhausts, hot-air vents, and heaters.
Be sure there is adequate airflow.
Keep the switch at least 6 ft.(1.83 m) away
from the nearest source of electromagnetic
noise, such as a photocopy machine.
4 Connect to the DataPorts
Depending on the model, your switch can have
the following ports:
8, 12, 13, or 14 10/100Base-TX ports
0, 1, or 2 100Base-FX ports
0, 1, or 2 Gigabit ports
10/100Base-TXand100Base-FXPorts
Theseports come in 10/100Base-TX/FX/BX
interfaces. They can connect todevices such as
an IP surveillance camera or a Voice Over
Internet Protocol (VoIP) phone.
A.Insert one end of an appropriate cable into a
switch port.
B.Connect the other end into the Ethernet port
of the device.
C.Repeat steps A and B for each additional
device you want to connect to the switch.
Gigabit Ports
Some switch models have 1 or 2
10/100/1000Base-TX ports, 1000Base-SX/LX/BX
ports, or 2-port 1000BaseSFP-combo
10/100/1000Base-TX ports.
You can connect these portsto network devices
such as a computer, printer, network video
recorder (NVR), network storage, or they can
connect to the network itself.
SFP-combo ports operate in “either/or” fashion.
This means that attaching to a 1 Gbps combo
port renders the equivalent partner combo port
unavailable.
5 Apply Power
The switch has two pairs of power inputs:
A 12-32VDC terminal block
A 12VDC jack
Only one power input is required to operate the
switch.However, redundant power supply
functionality is supported.
Terminal Block
The switch provides two power inputs on a 12-
32VDC terminal block. Only one power input is
required to operate the switch. The terminal
block has 4 terminal posts.
PinDescription
Power 2+ 12-32VDC
−Power Ground
Power 1 + 12-32VDC
−Power Ground
Earth Ground
Relay Output Rating0.7A @ 12VDC, 0.35A @ 24VDC
EX72000 Managed SwitchInstallation Guide
Continued on next page
Produktspezifikationen
| Marke: | EtherWAN |
| Kategorie: | Schalter |
| Modell: | EX72000 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit EtherWAN EX72000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schalter EtherWAN
EtherWAN EX42395AT Bedienungsanleitung EtherWAN EX75900 Bedienungsanleitung EtherWAN EX42300 Bedienungsanleitung EtherWAN EX19164 Bedienungsanleitung EtherWAN EX46910 Bedienungsanleitung EtherWAN EX16916 Bedienungsanleitung EtherWAN EX78900X Bedienungsanleitung EtherWAN InfraGreEn IG5 Bedienungsanleitung
Alle EtherWAN Schalter Bedienungsanleitungen
Beliebt in Schalter
EtherWAN EX73900X Bedienungsanleitung EtherWAN EX77000 Bedienungsanleitung EtherWAN EX78900G Bedienungsanleitung
Bedienungsanleitung Schalter
Neueste Bedienungsanleitungen für Schalter
Sonoff ZBM5-120W Bedienungsanleitung HP OfficeConnect 1420 8G Bedienungsanleitung HP OfficeConnect 1920 8G Bedienungsanleitung HP OfficeConnect 1420-5G Bedienungsanleitung Cisco Catalyst 3650 Bedienungsanleitung HP Aruba 8320 Bedienungsanleitung Sonoff IW100 Bedienungsanleitung Sonoff IW101 Bedienungsanleitung Cisco SG350X Bedienungsanleitung Tenda TEG1100 Bedienungsanleitung