EtherWAN EX78900X Bedienungsanleitung
Lies die bedienungsanleitung für EtherWAN EX78900X (2 Seiten) kostenlos online; sie gehört zur Kategorie Schalter. Dieses Handbuch wurde von 14 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 7.5 Bewertungen. Hast du eine Frage zu EtherWAN EX78900X oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2

W70G-EX78900XQ3 Page 1
Copyright 2022 EtherWAN Systems, Inc. All Rights Reserved 12/26/2022
Installation Guide
EX78900X Series | Hardened Managed Ethernet Switch
Switch
Unpacking
Open the carton and unpack the items. Your package should include:
▪ One EX78934X hardened managed switch
▪ One RJ-45 console cable
If any items are missing or damaged, notify your EtherWAN representative. If
possible, save the carton and packing material in case you need to ship or store the
switch in the future.
What Else You Need
▪ Appropriate cables for data ports. To prevent damage to the switch from
electrical surges, it is recommended to use STP (Shielded twisted pair)
cabling.
▪ Personal computer or laptop
▪ Appropriate SFP modules for SFP ports
Select a Location
▪ Installations: DIN-Rail mount.
▪ Select a power source within 6 feet (1.8 meters).
▪ Choose a dry area with ambient temperature between -40 and 75ºC (-40
and 167ºF).
▪ For use at altitudes up to 2000 meters, indoor use only.
▪ Humidity range (Operational): 5% to 95%, non-condensation
▪ For use in Pollution 2 environment.
▪ Do not block the device ventilation holes.
Connect to the Data Ports
Depending on the model, your switch can have the following ports:
EX78934X-0VB
12-port 10/100/1000BASE-T(12 x 90W) PoE
+ 4-port 1G/10G SFP+
EX78934X-0VB-CC
12-port 10/100/1000BASE-T(12 x 90W) PoE
+ 4-port 1G/10G SFP+
10/100/1000BASE-TX (PoE) Ports
Ports that support Power over Ethernet provide power to networked devices such
as IP Phones, Wireless LAN Access Points, and IP security cameras with a power
budget of 360 Watts.
PoE 90W Limitation
When using PoE ports at 90 Watts, use PoE ports – 1, 4, 8, and 9 for 90W PoE. See
example below:
1G/10G SFP Ports
SFP transceivers can be installed directly into SFP slots. Ensure that the same type
of transceiver is used at both ends of the link and that the correct type of fiber
cable is used.
Connect Power
▪ The switch has two pairs of power inputs.
▪ Only one power input is required to operate the switch. However,
redundant power supply functionality is supported.
▪ Power rating:
▪ PoE 30 Watts per port: 52–57 VDC, 7.3-6.7 A
▪ PoE 90 Watts per port: 54–57 VDC, 7.1-6.7 A.
▪ The power input specification complies with the requirements of SELV
(Safety Extra Low Voltage), and the power supply should comply with UL
61010-1 and UL 61010-2-201.
Terminal Block
The switch provides two power inputs on a 52-57VDC terminal block. The
terminal block has 5 terminal posts.
Pin
Description
Power 1
+
52-57VDC
−
Power Ground
Power 2
+
52-57VDC
-
Power Ground
Earth Terminal
Relay Output
Rating
0.5A @48VDC
Relay Output Alarm
The switch provides two relay output contacts. Both Relay 1 and Relay 2 signal
actions from one of the digital inputs. The relay outputs can be connected to an
alarm signaling device. The Current is 0.5A@48VDC at Normal Open or Normal
Close.
3 Normal Open | 2 Ground | 1 Normal Close
Power-Up Sequence
When the switch is powered up:
▪ All Link/ACT LEDs blink momentarily.
▪ The Power 1 LED light goes ON.
▪ LEDs for every port connected to a device will flash, as the switch conducts a
brief Power On Self-Test (POST).
Front Panel LEDs
LED
Color
Status
Power 1 & 2
Green
On: Power on
Off: Power off
Link/Act
Green
On: Network connection established
Flashing: Port sending or receiving data
PoE
Amber
On: Powered device is connected
Off: Powered device is disconnected
Alarm
Red
Link down or power down
Produktspezifikationen
| Marke: | EtherWAN |
| Kategorie: | Schalter |
| Modell: | EX78900X |
Brauchst du Hilfe?
Wenn Sie Hilfe mit EtherWAN EX78900X benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schalter EtherWAN
5 November 2025
5 November 2025
5 November 2025
4 November 2025
4 November 2025
4 November 2025
3 November 2025
3 November 2025
3 November 2025
3 November 2025
Bedienungsanleitung Schalter
- Quigg
- Krone
- JUNG
- Pyle
- Extreme Networks
- Baco
- Intertechno
- Powerfix
- LogiLink
- Orei
- Adviti
- Wago
- One For All
- Renkforce
- Wallair
Neueste Bedienungsanleitung für -Kategorien-
16 Januar 2026
13 Januar 2026
11 Januar 2026
10 Januar 2026
10 Januar 2026
10 Januar 2026
9 Januar 2026
5 Januar 2026
2 Januar 2026
28 Dezember 2025