EverFocus Palun Bedienungsanleitung
EverFocus
Nicht kategorisiert
Palun
Lies die bedienungsanleitung für EverFocus Palun (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 28 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 14.5 Bewertungen. Hast du eine Frage zu EverFocus Palun oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
1
Introduction
Palun -is a PoE powered Video Balun which can transmit both power and digital IP video
signal over coaxial cable. With Palun, you can easily upgrade the surveillance system from
analog to IP, leveraging the existing coaxial infrastructure without re-cabling , . Moreover a
smart switch design enables to better accommodate camera of different class level Palun s s.
Please see all the detail information in this document.
PoE Switch IP CameraPalun Palun
1W 1W
RJ45 Coax RJ45
Power Provider Power Consumer
How to Use the Switch on Palun?
The switch on Palun (the blue one only) is designed for adjusting the power output from
the P oE switch in order to better accommodate cameras of different class levels.
If the IP camera’s PoE type is Class 1~4, please switch it to C1+.
(If your IP camera s class level is 1, Palun will advertise it as Class 2’ to the PoE switch; if the
camera is Class 2, Palun will advertise it as Class 3 to the PoE switch, and so forth)
Class 1~4
C0
C1+
If the IP camera’s PoE type is Class 0, please switch it to C0.
Class 0
C0
C1+
2
Why to Use the Switch on Palun?
Originally, if your camera is Class 1 and consumes 4W, the PoE switch detects the class
level and sends which is sufficient to power up Class 1 guaranteed maximum 4W of power
the camera. However, Palun also consumes w2 atts of power, so the total power
consumption (6W) of both Palun and IP camera exceed ed by s the power (4W) deliver the
PoE switch.
PoE Switch Palun (without switch) IP Camera
2W
4W / Port 4W
Class 1
Class 1
Now, if you switch Palun to C1+ (for Class 1~4 IP camera , only) it will help to increase the
guaranteed power output from the PoE a switch by dvertising a higher class level.
Therefore, in our example above, even though the IP camera lass 1, Palun will advertise is C
it as Class 2 to the PoE switch so that the PoE switch w ill reserve a Class 2 guaranteed
power (7W) for devices connected to this port. Then, it is now up both sufficient to power
camera and Palun.
PoE Switch Palun (C1+) IP Camera
2W
7W / Port 4W
Class 1
Class 2
Class 2
Guaranteed Power at EverFocus PoE Switch
IEEE PoE Standard Class Guaranteed Power at PoE Switch
IEEE802.3af
IEEE802.3at (Type 1)
0 15.4W
1 4W
2 7W
3 15.4W
IEEE802.3at (Type 2) 4* 30W
Table 1
* Class 4 can only be used by IEEE802.3at (Type 2) devices.
Produktspezifikationen
| Marke: | EverFocus |
| Kategorie: | Nicht kategorisiert |
| Modell: | Palun |
Brauchst du Hilfe?
Wenn Sie Hilfe mit EverFocus Palun benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert EverFocus
20 August 2024
20 August 2024
20 August 2024
18 August 2024
17 August 2024
31 März 2024
Bedienungsanleitung Nicht kategorisiert
- Twisper
- Selfsat
- Duux
- Fetch
- Seasonic
- Ygnis
- Bodum
- Badiona
- MOON
- Gerber
- BLOW
- Quadro
- Oregon Scientific
- Bose
- WMD
Neueste Bedienungsanleitung für -Kategorien-
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
