EverFocus Palun SE Bedienungsanleitung


Lies die bedienungsanleitung für EverFocus Palun SE (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 3.9 Sterne aus 10 Bewertungen. Hast du eine Frage zu EverFocus Palun SE oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
1
Important Notice
*PALUN SE is not backward compatible with first generation PALUN.
* Wire quality and aging may decrease transmission efficiency and cause
abnormalities in compatibility.
Introduction
PALUN SE is a PoE-powered Video Balun which can transmit both power and
digital IP video signal over coaxial cable. With PALUN SE, you can easily
upgrade the surveillance system from analog to IP, leveraging the existing
coaxial infrastructure without re-cabling.
PALUN SE supports connecting with PoE devices, allows flexible usage of
networking products. Moreover, a smart switch design enables PALUN SE to
better accommodate PoE devices of different class levels. Please see all the
detail information in this document.
PoE Device Connection Diagram
PoE Switch
PoE Device
PALUN SE TX PALUN SE RX
1W
1W
RJ45 Coax RJ45
Power (Provider)
Power (Consumer)
328ft./100m 492ft./150m 328ft./100m
C0
C1+
* Coax. cable with 75Ω impedance is strongly recommended


Produktspezifikationen

Marke: EverFocus
Kategorie: Nicht kategorisiert
Modell: Palun SE

Brauchst du Hilfe?

Wenn Sie Hilfe mit EverFocus Palun SE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten