Extech DV25 Bedienungsanleitung
Lies die bedienungsanleitung für Extech DV25 (1 Seiten) kostenlos online; sie gehört zur Kategorie Messung. Dieses Handbuch wurde von 18 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 9.5 Bewertungen. Hast du eine Frage zu Extech DV25 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1
DV25- - _ 4 5/23en US 2.
USER MANUAL
Model DV25 Dual Range AC Voltage Detector + Flashlight
Safety
WARNING Risk of Electrocution. Before use, always test the :
Voltage Detector on a known live circuit to verify proper
operation
WARNING Risk of Electrocution. Keep hands and fingers on the :
body of the probe and away from the probe tip
CAUTION Read, understand, and follow Safety Rules and :
Operating Instructions in this manual before using this
product.
Do not attempt to repair this unit. There are no user serviceable
parts.
Do not expose the unit to extreme temperatures or high humidity
Do not use the unit if it is wet or damaged
Do not apply more than the rated voltage between the probe tip
and ground.
Do not operate with the case open
This symbol, adjacent to another symbol or terminal, indicates
the user the user must refer to the manual for further
information.
This symbol, adjacent to a terminal, indicates that, under normal
use, hazardous voltages may be present
Double insulation
Specifications
Voltage Sensitivity 100V to 00V AC, 50/60Hz 10
24V to 1000V AC, 50/60Hz
Detection distance <0.2”
Operating Temperature 0 to 50
o
C (32 to 122
o
F)
Storage Temperature -20 to 60
o
C (-4 to 140
o
F)
Altitude Operate below 2000 meters
Relative Humidity 80% up to 31
o
C, decreasing to 50% at 50
o
C
Battery 2 AAA batteries
Dimensions/Weight / 159x25mm ( ) 6.25x1” 42g (1.5oz)
Safety For indoor use and in accordance with Overvoltage
Category - 00V, Pollution Degree 2. IV 10
Copyright 2023 Teledyne FLIR Commercial Systems, Inc.©
All rights reserved including the right of reproduction in whole or in part in
any form
www.extech.com
This document does not contain any export-controlled information
Operating Instructions
AC VOLTAGE DETECTION
1. For low voltage testing (24 to 100V), press and hold the
24V button (5). For standard electrical work (>100V,
this is not necessary.
2. Touch the probe tip (7) to the hot conductor or insert
into the hot side of the electrical outlet.
3. If AC voltage is present, the detector cone will illuminate
(6) and the detector will beep.
NOTE: The detector is designed with high sensitivity. Static
electricity or other sources of energy may randomly
trip the senso This is normal operation.r.
FLASHLIGHT
Press and hold the flashlight ON/OFF button (2) to turn
on the flashlight (1).
BATTERY INSTALLATION
1. Remove the end cap (3 b inserting a small ) y
screwdriver in the pocket clip (4) to release the catch.
2. Insert two AAA batteries (observe polarity).
3. Replace the end cap
NOTE: If your meter does not work properly, che the battery ck
to make sure that it still good and that it is properly inserted.
Never dispose of used batteries or rechargeable
batteries in household wast e.
As consumers, users are legally required to take used
batteries to appropriate collection sites the retail store ,
where the batteries were purchased, or wherever
batteries are sold.
Disposal: Do not dispose of this instrument in household
waste. The user is obligated to take end- -life devices to of
a designated collection point for the disposal of el trical ec
and electronic equipment.
Two-year Warranty
Teledyne FLIR warrants this Extech brand instrument be free of defects to
in parts and workmanship for from date of shipment (a six-two years
month limited warranty applies to sensors and cables). To view the full
warranty text please visit: http://www.extech.com/support/warranties.
Contact Customer Support
Customer Support Telephone List: https://support.flir.com/contact
Calibration, Repair, and Returns: repair@extech.com
Technical Support: https://support.flir.com
Produktspezifikationen
| Marke: | Extech |
| Kategorie: | Messung |
| Modell: | DV25 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Extech DV25 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Messung Extech
5 Januar 2026
5 Januar 2026
4 Januar 2026
4 Januar 2026
4 Januar 2026
8 Dezember 2025
8 Dezember 2025
8 Dezember 2025
8 Dezember 2025
7 Dezember 2025
Bedienungsanleitung Messung
- AstroAI
- BENNING
- ORNO
- Enovalab
- Lumel
- Grundfos
- Devine
- Yato
- SHX
- Lund
- Ermenrich
- Adwa
- Intellinet
- TDE Instruments
- RaySafe
Neueste Bedienungsanleitung für -Kategorien-
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
19 Januar 2026
19 Januar 2026
19 Januar 2026
19 Januar 2026
18 Januar 2026