Extech PH105 Bedienungsanleitung


Lies die bedienungsanleitung für Extech PH105 (1 Seiten) kostenlos online; sie gehört zur Kategorie Messgeräte. Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 8.5 Bewertungen. Hast du eine Frage zu Extech PH105 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
PH105 pH Electrode
Installation Instructions
1. Turn meter power “off.
2. Remove retaining collar holding probe on meter.
3. Pull, with a gentle “rocking” motion, to remove old probe.
4. Reverse order to install new probe. Do not touch contacts.
5. Before first use or after extended storage, soak the electrode (with its cap removed) in a pH 4 solution for about 10
minutes.
For further instructions, see instrument User Manual.
This probe is compatible with:
CL200 ExStik Chlorine Meter
PH100 ExStik pH Meter
PH110 ExStik pH Meter
RE300 ExStik ORP Meter
Contact Customer Support
Customer Support Telephone List: https://support.flir.com/contact
Calibration, Repair and Returns, : repair@extech.com
Technical Support: https://support.flir.com
Copyright 2022 Teledyne FLIR LLC ©
All rights reserved including the right of reproduction in whole or in part in any form
www.extech.com


Produktspezifikationen

Marke: Extech
Kategorie: Messgeräte
Modell: PH105

Brauchst du Hilfe?

Wenn Sie Hilfe mit Extech PH105 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten